摘要
通过扫描电镜、Ｘ射线衍射仪、Ｘ光能谱仪、显微硬度计研究了２Ｃｒ１３不锈钢表面激光熔覆Ｎｉ合金层的组织，并分析热处理对Ｎｉ合金层组织和显微硬度的影响。结果表明：Ｎｉ合金层由下至上可分为平面晶区，胞状晶区及枝晶区。激光熔覆Ｎｉ合金层后熔覆层的显微硬度由２３０ＨＶ提高到５００－７００ＨＶ，热处理后Ｎｉ合金层的组织较热处理前细化，其显微硬度高达８５０－１１２０ＨＶ。
Structure of laser fusion Ni alloy on the surface of 2Cr13 S.S. is studied with scanning electron microscope, x-ray diffractor, xray spectral meter and microdurometer and effectiveness of heat treatment to Ni alloy structure and microhardness is analyzed. The resultshows that the Ni alloy layer can be divided into planar crystalline region, cell crystalline region and branching crystalline region from thelower to the upper. The microbardness of fusion layer after laser fusion Ni alloy layer is increased from 230HV to 500-700HV, the structure of Ni alloy layer after heat treatment is finer than that of before heat treatment, the microhardness is up to 850- 1 120HV.
出处
《黑龙江石油化工》
1999年第2期30-32,共3页
Heilongjiang Petrochemical Technology
关键词
激光熔覆
汞
硬度
镍合金层
铬钢
不锈钢
Laser fusion
Ni alloy layer
Microstructure
Microhardness
