摘要
应用气吹灌浆铺设技术将分布式光纤传感器埋入二次衬砌混凝土内部,并将光纤传感器时变应力场监测结果与施工初期埋入的传统传感器初始应力场叠加,得到隧道二次衬砌的长期真实应力水平;通过对采用气吹灌浆铺设的光纤传感器进行标定试验,对二次衬砌长期应力场的监测断面进行应力水平分析,提出将时间序列分析方法应用于所有监测断面健康状态评估。结果表明:所提出的方法能够实现对隧道二次衬砌的全寿命健康诊断与评估。
Distributed optical fiber sensors were embedded into secondary lining concrete by air-blowing and vacuum grouting technology.The initial stress field and time-varying stress field of secondary lining were established respectively by using traditional sensors and monitoring of distributed optical fibers.The long-term true stress level which was used to diagnose secondary lining was calculated by adding initial stress field to time-varying stress field.Calibration experiment of optical fiber sensor was carried out.Stress level of monitoring section of long-term secondary lining stress field was analyzed.The feasibility of health state assessment of monitoring section by using method of time series analysis was discussed.Research results can realize whole life health diagnosis and evaluation for tunnel secondary lining.
出处
《中国公路学报》
EI
CAS
CSCD
北大核心
2011年第2期77-82,88,共7页
China Journal of Highway and Transport
基金
中央高校基本科研业务费专项资金项目(2010XZZX002-9)
浙江省交通投资集团科技项目(200705)
关键词
隧道工程
二次衬砌
健康监测
分布式光纤传感器
应力场
tunnel engineering
secondary lining
health monitoring
distributed optical fiber sensor
stress field
