摘要
对高炉鼓风除湿技术及优点进行分析,在对鼓风除湿方法进行对比的基础上,提出采用冷凝法对首秦公司的两座高炉进行鼓风除湿技术改造,并对节能效果进行分析,为其它企业新上鼓风除湿技术提供参考。
同被引文献16
-
1蔡漳平,沙永志.重视高炉鼓风湿分的影响和调剂作用[J].钢铁,2004,39(12):1-3. 被引量:13
-
2王筱留.高炉脱湿鼓风技术[J].鞍钢技术,2006(3):1-4. 被引量:11
-
3Fumo N,Goswami D Y.Study of an aqueous lithium chloride desiccant system: air dehumidification and desiccant regeneration. Solar Energy . 2002
-
4DaI YJ,Wang RZ,Zhang HF,et al.Use of liquid desiccant cooling to improve the performance of vapor compression air conditioning. Applied Thermal Engineering . 2001
-
5Martin V,Goswami D.Y.Effectiveness of heat and mass transfer processes in a packedbed liquid desiccant dehumidifier/regenerator. HVAC R Research . 2000
-
6Liu Xiaohua,Jiang Yi,Yi Xiaoqin.Effect of regeneration mode onthe performance of liquid desiccant packed bed regenerator. Renewable Energy . 2009
-
7Ali A,Vafai K,Khaled A R A.Comparative study between parallel and counter flow configurations between air and falling film desiccant in the presence of nanoparticle suspensions. International Journal of Energy Research . 2003
-
8Liu X H,Qu K Y,Jiang Y.Empirical correlations topredict the performance of the dehumidifier using liquiddesiccant in heat and mass transfer. Renewable Energy . 2006
-
9Jain S,Bansal P K.Performance analysis of liquid desiccant dehumidification systems. International Journal of Refrigeration . 2007
-
10Ali A,Vafai K.Analysis of heat and mass transfer between air and falling film in a cross flow configuration. International Journal of Heat and Mass Transfer . 2004
引证文献3
-
1殷勇高,潘雄伟,陈瑶,张小松.顺流型溶液与空气热质交换性能[J].化工学报,2012,63(S2):26-31. 被引量:6
-
2韩宗伟,赵晶,蔡九菊,徐鹤,丁慧婷.脱湿鼓风对高炉系统能耗的影响[J].钢铁,2013,48(11):16-20. 被引量:2
-
3刘辉,杨明,李康,陈建刚.高炉进风冷凝除湿技术经济性分析[J].制冷与空调,2019,19(12):66-68.
二级引证文献8
-
1钱俊飞,殷勇高,潘雄伟,张小松.平板降膜溶液除湿再生过程实验研究及模型验证[J].化工学报,2014,65(6):2070-2077. 被引量:6
-
2周君明,彭冬根,申传涛,黄红.热湿地区不同溶液除湿蒸发冷却系统性能研究[J].暖通空调,2017,47(7):124-130.
-
3杨丁丁,柳建华,徐小进,张良.逆流型废液与非饱和空气的热质交换性能研究[J].上海理工大学学报,2018,40(5):416-422.
-
4王泽印,殷勇高.空压机废热驱动溶液式压缩空气干燥特性实验研究[J].东南大学学报(自然科学版),2019,49(5):851-857. 被引量:1
-
5倪辉,杨自力,钟珂,陶睿杨,谷雨倩.内热型超声雾化溶液再生系统最优内热量的研究[J].化工学报,2020,71(3):1035-1044. 被引量:1
-
6杨丁丁,柳建华,徐小进,张良.逆流形式下废液与空气热湿传递驱动力的解耦分析及实验验证[J].能源研究与信息,2021,37(2):100-107. 被引量:1
-
7刘峰,余波,吴家欣.能量回收型脱湿工艺探讨[J].冶金能源,2022,41(4):3-6.
-
8程相锋,张福明,青格勒,徐萌,张彦.喷吹天然气条件下高炉主要工艺参数的研究[J].钢铁研究学报,2022,34(9):944-951. 被引量:11
-
1徐连青.汽轮机内部除湿技术刍议[J].机电信息,2012(12):132-133. 被引量:3
-
2黄祎林,吴兆林,周志钢.热泵除湿技术的应用与发展[J].化工装备技术,2008,29(1):17-21. 被引量:6
-
3戴博林.浅谈汽轮机内部除湿技术[J].科技风,2016(14):118-118.
-
4色漆和清漆 耐湿性的测定连续冷凝法[J].合成材料老化与应用,1995(4):18-20.
-
5高晶,李凤武,常安全.如何提高粘胶纤维生产中二硫化碳的回收[J].科技资讯,2014,12(13):132-132.
-
6孙可华.沈阳鼓风集团自主研制成功大型乙烯裂解气压缩机组[J].国内外石油化工快报,2006,36(3):13-13.
-
7卢琴芳,徐常龙,李小兵,张华禄,谢宝华.耐高温硅橡胶实验制备及耐热性能研究[J].实验技术与管理,2013,30(9):50-52. 被引量:11
-
8祝智敏,张银华,徐珊,王健.醇型透明室温硫化硅橡胶的制备[J].有机硅材料,2017,31(2):98-102. 被引量:8
-
9灵活、节能的除湿DRYMAX干燥机[J].现代塑料,2013(7):16-16.
-
10崔春霞.高密度聚乙烯装置低压溶剂回收系统分析[J].广州化工,2012,40(20):120-122. 被引量:7