期刊文献+

钴包埋镍酸锂的Mg掺杂改性研究 被引量:1

Research on Mg-doping LiNiO_2 coated with Co
在线阅读 下载PDF
导出
摘要 采用化学共沉淀法,得到不同比例的Mg和Ni均匀分布的氢氧化物沉淀,再以此为核,用Co(OH)2进行包覆,得到前驱体,和LiOH.H2O混合均匀后,经过高温煅烧得到不同镁含量的LiNi0.92-xMgxCo0.08O2正极材料,研究了不同比例Mg2+掺杂对钴包埋镍酸锂材料电性能的影响,结果表明,掺杂量x为0.005时,其1C放电比容量高达183.7mAh/g,循环100次的容量保持率为97.60%,循环性能较佳。 The precusor of LiNi0.92-xMgxCo0.08O2 was prepared by co-precipitation method,in which the spherical Ni0.92-xMgx(OH)2 grains were coated with Co(OH)2.The precursor was mixed with LiOH·H2O and the mixture was sintered at high temperature.The effect of Mg2+ doping on LiNi0.92-xMgxCo0.08O2 was studied.The results showed that the discharge capacity of LiNi0.92-xMgxCo0.08O2 was 183.7 mAh/g at 1 C when x=0.005,and it had good cyclic performance,its capacity retention was 97.60% after 100 cycles.
出处 《电池工业》 CAS 2010年第6期348-350,共3页 Chinese Battery Industry
关键词 锂离子电池 正极材料 镍酸锂 Mg掺杂 循环性能 Li-ion battery cathode material LiNiO2 Mg doping cyclic performance
  • 相关文献

参考文献9

  • 1A rai H,Okada S,Ohtsuka H,et el.Characterization and cathode performance of Li1-xNi1+xO2 prepared with the excess lithium method[J].Solid State Ionics,1995,80:261-269.
  • 2Chowdari B V R,Subha Bao G V,Chow S Y.Cathodic behavior of(Co,Ti,Mg)-doped LiNiO2[J].Solid State Ionics,2001,140:55-152.
  • 3Kim J,Kima B H,Baik Y H,et al.Effect of(Al,Mg)substitution in LiNiO2 electrode for lithium betteries[J].J Power Sources,2006,158:641-645.
  • 4Deng Xin-rong,Hu Guo-rong,Du Ke.Synthesis and electrochemical properties of Co,Mn-coated LiNiO2 lithiumion battery cathode materials[J].Materials Chemistry and Physies,2009,109:469-474.
  • 5Ekaterina Zhecheva,Badostina Stoyanova,Georgi Tyuliev,et al.Surface interaction of LiNi0.8Co0.2O2 cathodes with MgO[J].Solid State Sciences,22003,(5):711-720.
  • 6万新华,刘庆国.包埋镍酸锂为正极的AA电池性能研究[J].电源技术,2004,28(9):538-541. 被引量:2
  • 7Zhong Sheng-wen,Zhao Yu-juan,Lian Fang,et el.Characteristics and electrochemical perfomance of cathode material co-coated LiNiO2 for Li-ion batteries[J].Trans Nonferrous Met SOC China,2006,16:137-141.
  • 8梅佳,张骞,钟盛文,张淑静,初旭光,李月涛,刘庆国.Co、Mn包覆镍基材料LiNi_(0.90)Co_(0.05)Mn_(0.05)O_2的烧结温度与性能研究[J].电源技术,2007,31(5):376-381. 被引量:4
  • 9Ohzuku T,Ueda A,Nagayama M.Electrochemistry and structural chemistry of LiNiO2(R3m)for 4 volt secondary lithium cells[J].J Electrochem Soc,1993,140(7):1862-1870.

二级参考文献16

  • 1MACNEIL D D. An autocatalytic mechanism for the reaction of LixCoO2 in electrolyte at elevated temperature [J]. J Electrochem Soc, 2000,147(3): 970-979.
  • 2ERMETE A, MAURIZIO F. Synthesis and thermal stability of LiCoO2[J]. J Solid State Chem, 1995,117: 1-7.
  • 3DAHN J R, FULLER E W, OBROVAC M, et al. Thermal stability of LixCoO2 and LixNiO2 and LixMnO2 and consequences for the safety of Li-ion cells[J]. Solid State Ionics, 1994, 69: 265-270.
  • 4NELSON R F. Power requirements for batteries in hybrid electric vehicles[J]. J Power Sources, 2000, 9: 12-26.
  • 5DELMAS C. On the behavior of the LiNiO2 system: an electrochemical and structural overview[J]. J Power Sources, 1997, 68:120-126.
  • 6HUANG H, VINCENT C A, BRUCE P G. Capacity loss of lithium manganese oxide spinel in LiPF6/ethylene carbonate-dimethyl carbonate electrolytes[J]. J Electrochem Soc, 2000,146: 481-487.
  • 7XIA Y, ZHOU Y, YOSHIO M. Capacity fading on cycling of 4 V Li/LiMn2O4 cells[J]. J Electrochem Soc, 1997,144:2 593-2 600.
  • 8VENKATRAMAN S,CHOI J,MANTHIRAM A.Factors influencing the chemical lithium extraction rate from layered LiNi1-y-zCoyMnzO2 cathodes[J].Electrochemistry Communications,2004,6:832-837.
  • 9LIAO P Y,DUH J G,SHEEN S R.Microstructure and electrochemical performance of LiNio.6Mn0.4-zM2xO2 cathode materials[J].J Power Sources,2005,143:212-218.
  • 10OHZUKU T,UEDA A,NAGAYAMA M.Electrochemisty and stmctural chemistry of LiNiO2(R3m)for 4 volt secondary lithium cells[J].J Electrochem Soc,1993,140(7):1 862-1 870.

共引文献4

同被引文献18

  • 1唐爱东,王海燕,吴晓,黄可龙.掺杂锂镍钴锰氧材料的合成及电化学性能[J].电源技术,2007,31(12):959-962. 被引量:10
  • 2PAN Cheng-chi, BANKS Craig E, SONG Wei-xin, WANG Chi-wei, CHEN Qi-yuan, JI Xiao-bo. Recent development of LiNixCoyMnO2: Impact of micro/nano structures for imparting improvements in lithium batteries[J] .Transactions of Nonferrous Metals Society of China, 2013, 23(1): 108-119.
  • 3LIAO P Y, DUH J G. SHEEN S R. Microstructure and electrochemical performance of LiNi0.6Co0.4-xMnxO2 cathode materials[J]. Journal of Power Sources, 2005, 143:212-218.
  • 4ZHANG Pei-xin, ZHANG Li, REN Xiang-zhong, YUAN Qiu-hua, LIU Jian-hong, ZHANG Qian-ling. Preparation and electrochemical properties of LiNi1/3Co1/3Mn1/3 O2-PPy composites cathode materials for lithium-ion battery[J]. Synthetic Metals, 2011, 161: 1092-1097.
  • 5RILEY L A, ATTA S V, CAVANAGH A S, YAN Y, GEORGE S M, LIU P, DILLON A C, LEE S H. Electrochemical effects of ALD surface modification on combustion synthesized LiNi1/3Mn1/3Co1/3O2 as a layered-cathode material[J]. Journal of Power Sources, 2011, 196: 3317-3324.
  • 6OHZUKU T, UEDA A, NAGAYAMA M. Electrochemistry and structural chemistry of LiNiO1 (R3m) for 4 volt secondary lithium cells[J]. Journal of the Electrochemical Society, 1993, 140(7): 1862-1870.
  • 7DENG Long-zheng, WU Feng, GAO Xu-guang, LIU Zhen-tian,XIE Hai-ming. Synthesis and electrochemical properties of LiNi087Co0.10Mg0.0302 cathode materials[J]. Transactions of Nonferrous Metals Society of China, 2015, 25(2): 527-532.
  • 8LIAO Pei-ytm, DUH Jenq-gong, LEE Jyh-fu, Valence change and local structure during cycling of layer-structured cathode materials[J]. Journal of Power Sources, 2009, 189: 9-15.
  • 9KANG S I-I, K/M J, STOLL M E, ABRAHAM D, SUN Y K, AMINE K. Layered Li(Nio 5-xMno.5-xM)O2 (M=Co, A1, Ti; x-=0, 0.025) cathode materials for Li-ion rechargeable batteries[J]. Journal of Power Source, 2002, 112: 41-48.
  • 10LIM Sung-nam, AHN Wook, YEON Stm-hwa, PARK Seung-bin. Enhanced elevated-temperature performance of Li(Ni0.8Co0.15-Al0.05)O2 electrodes coated with Li2O-2B2O3 glass[J]. Electrochimica Acta, 2014, 136: 1-9.

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部