期刊文献+

粉煤灰吸附特性研究 被引量:2

Study on the Adsorption Characteristics of Fly Ash
在线阅读 下载PDF
导出
摘要 在粉煤灰理化特性分析的基础上,对粉煤灰进行了物理激发和化学激发.研究结果表明:物理激发和化学激发均能提高粉煤灰的吸附活性.化学激发方法在反应温度为90℃、反应时间为12h、灰钙比为5、水固比为15时,粉煤灰的吸附活性提高最大. After having analyzed the physicochemical properties of fly ash,we took physical activation and chemical activation on it.The result shows that both physical activation and chemical activation can enhance the adsorption activity of fly ash.The adsorption activity of fly ash reached the maximum while the reaction temperature was 90 ℃;the reaction time was 12 h;the weight ratio of fly ash and Ca(OH)2 was 5;the weight ratio of water and solid amount was 15.
作者 陈若莉
机构地区 福建工程学院
出处 《徐州工程学院学报(自然科学版)》 CAS 2010年第4期53-57,共5页 Journal of Xuzhou Institute of Technology(Natural Sciences Edition)
关键词 粉煤灰 烟气脱硫 比表面积 物理激发 化学激发 fly ash flue gas desulfurization specific surface area physical activation chemical activation
  • 相关文献

参考文献7

二级参考文献14

  • 1钟白茜,张少明.粉煤灰的活性与激活措施[J].粉煤灰综合利用,1995,9(4):41-43. 被引量:16
  • 2管宗甫,杨久俊.碱对粉煤灰活性激发的研究[J].粉煤灰综合利用,1996,10(1):22-24. 被引量:20
  • 3方萍,孟祥银.活性粉煤灰作水泥混合材的应用研究[J].粉煤灰综合利用,1996,10(1):30-32. 被引量:2
  • 4王元,郭佩玲,陈翠红,王春波.大掺量粉煤灰砼的试验研究[J].粉煤灰综合利用,1996,10(2):16-19. 被引量:5
  • 5陆永琪.钙基吸着剂干法脱硫机理的研究(学位论文)[M].北京:清华大学,1997..
  • 6MONTGOMETRY.实验设计与分析[M].北京:中国统计出版社,1998..
  • 7Hiroaki Tsuchiai. Highly active absorbents for SO2 removal prepared from coal fly ash. Ind. Eng. Chem. Res., 1995, 34:1404--1411.
  • 8Hiroaki Tsuchiai. Study of flue gas desulfurization aborbent prepared from coal fly ash : effects of the composition of the absorbent on the activity. Ind. Eng. Res., 1996,35 : 2322--2326.
  • 9J. F. IZQUIERDO. Fly ash reactivation for the desulfurization of coal-- Fired utility station's flue gas. Separation Science and Technology, 1992,27 ( 1 ) : 61--72.
  • 10Kurt K. Kind. Effects of salts on preparation and use of calcium silicates for flue gas desulfurization. Environ. Sci. Technol.,1994,28 : 277--283.

共引文献31

同被引文献16

引证文献2

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部