期刊文献+

脉冲电晕等离子体作用下甲烷偶联反应的研究Ⅱ.反应添加气的影响 被引量:12

Coupling of Methane Under Pulse Corona Plasma Ⅱ.Effect of Gas Additives
在线阅读 下载PDF
导出
摘要 考察 了 H2 、 N2 、 He 、 C O2 和 O2 等添 加气在 常温常压 下对脉冲 电晕 等离 子体 作用 下甲 烷脱氢偶联 反应的 影响. 结果表明 , H2 对甲烷 脱氢偶 联 反应 的影 响 不大 ; N2 和 He 虽 能在 一定 程 度上促进 C2 H6 和 C2 H4 的 形 成 并 抑 制 C2 H2 的 形 成 , 但 并 不 能 改 变 C2 产 物 中 C2 H2 的 主 体 地 位( > 75 % ) . 在 C H4 C O2 体系中,甲 烷转化 率随 n( C O2)/ n( C H4) 值的 增大而上 升, C2 H2 的选 择性在保持一 段稳定 后急剧下 降,而 C2 H6 和 C2 H4 的选 择 性变 化不 大. 当 n( C O2)/ n ( C H4) = 02 时, C2收率最高 . 在 C H4 O2 体系中,甲 烷转 化率 随 n ( O2) / n( C H4) 值 的增 大 而 上升 ,但 C2 收 率仅 在 n( O2)/ n( C H4) < 016 范 围内略有 提高. The functions of several gas additives: hydrogen, nitrogen, helium, carbon dioxide and oxygen on the dehydrogenative coupling of methane under pulse corone plasma at ambient temperature and atmospheric pressure have been examined. The results showed that hydrogen has hardly any influences on the coupling of methane. Nitrogen and helium are helpful to the formation of ethane and ethylene and restrain the acetylene formation to a certain degree. Acetylene remains as the main component (>75%) among C 2 products. Increasing the ratio of carbon dioxide to methane causes an increase of methane conversion, whereas C 2H 2 selectivity decreases dramatically after a relative stable region and the C 2H 6 and C 2H 4 selectivities show little change. The C 2 yield exibits a maximum at a CO 2/CH 4 ratio of 0 2. Increasing the ratio of oxygen to methane increases the methane conversion but C 2 yield only slightly increases at O 2/CH 4 ratio less than 0 16.
出处 《应用化学》 CAS CSCD 北大核心 1999年第4期70-73,共4页 Chinese Journal of Applied Chemistry
基金 国家自然科学基金 大连理工大学三束与材料表面改性国家重点实验室资助 碳资源综合利用开放实验室联合资助
关键词 甲烷 脱氢偶联 脉冲电晕 等离子体 添加气 乙烯 methane,dehydrogenative coupling,pulse corona plasma,gas additive
  • 相关文献

参考文献4

  • 1Zhu A M,J Nat Gas Chem,1999年,8卷,1期,47页
  • 2朱爱民,博士学位论文,1998年
  • 3朱爱民,化学通报,1997年,9卷,25页
  • 4Huang J,J Phys Chem,1993年,97卷,37期,9403页

同被引文献105

引证文献12

二级引证文献34

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部