Numerical simulation of temperature field of AZ91D magnesium alloy during equal channel angular extrusion 被引量：2

Numerical simulation of temperature field of AZ91D magnesium alloy during equal channel angular extrusion

导出

摘要 The temperature field of AZ91D magnesium alloy extruded by equal channel angular extrusion （ECAE） has been simulated using finite element method （FEM）. A series of tests were designed to obtain the simulation parameters： flow stress of AZglD, friction factor and heat transfer coefficient. The simulated temperature agrees well with the measured one. The evolution of temperature and influencing factor was discussed in details. Furthermore. the extrusion pressure of ECAE was analyzed. The temperature field of AZ91D magnesium alloy extruded by equal channel angular extrusion （ECAE） has been simulated using finite element method （FEM）. A series of tests were designed to obtain the simulation parameters： flow stress of AZglD, friction factor and heat transfer coefficient. The simulated temperature agrees well with the measured one. The evolution of temperature and influencing factor was discussed in details. Furthermore. the extrusion pressure of ECAE was analyzed.

作者 Xiaohua ZHANG Yuansheng CHENG Shouting LUO

机构地区 School of Materials Science and Engineering

出处《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 2010年第1期35-40,共6页 金属学报（英文版）

基金 supported by the National Natural Science Foundation of China(No50705018)

关键词 SIMULATION Temperature field ECAE AZ91D Magnesium alloy Simulation Temperature field ECAE AZ91D Magnesium alloy

分类号 TG146.22 [金属学及工艺—金属材料] TG379 [金属学及工艺—金属压力加工]

引文网络
相关文献

参考文献1

1张晓华,罗守靖,杜之明.Uniformity and continuity of effective strain in AZ91D processed by multi-pass equal channel angular extrusion[J].中国有色金属学会会刊：英文版,2008,18(1):92-98. 被引量：3

二级参考文献2

1姜巨福,罗守靖,邹经湘.Preparation of AZ91D magnesium alloy semi-solid billet by new strain induced melt activated method[J].中国有色金属学会会刊：英文版,2006,16(5):1080-1085. 被引量：6
2吴昆,胡小石,郑明毅.Mechanical properties and damping capacities of magnesium alloys processed by equal channel angular extrusion(ECAE)[J].中国有色金属学会会刊：英文版,2005,15(S2):276-279. 被引量：4

共引文献2

1沈平,刘子利,孙颖迪.等通道转角挤压对镁锆阻尼合金组织和性能的影响[J].机械工程材料,2010,34(8):5-8.
2徐淑波,张森,景财年,林晓娟,刘鹏.纯铝圆形挤压件等通道弯角挤压微观组织与力学性能[J].塑性工程学报,2021,28(8):133-139. 被引量：2

同被引文献17

1LAPOVOK R Y,,BAMETT M R,DAVIES C H J.Construction of extrusion limit diagram for AZ31magnesium alloy by FE simulation. Journal of Materials . 2004
2WANG Zhen-jun,QI Le-hua,ZHOU Ji-ming.3D FE analysis on the product defects of composites formed by liquid-solid extrusion process. Journal of Materials . 2009
3SAANOUNI K.On the numerical prediction of the ductile fracture in metal forming. Engineering Fracture Mechanics . 2008
4QI Le-hua,ZHOU Ji-ming,SU Li-zheng,OUYANG Hai-bo,LI He-jun.Fabrication of Csf/Mg composites using extrusion directly following vacuum infiltration-Part 2: Forming process study. Solid State Phenomena . 2008
5G Liu,J Zhou,J Duszczyk.Prediction and verification of temperature evolution as a function of ram Speer during the extrusion of AZ31 alloy into a rectangular section. Journal of Materials Processing Technology . 2007
6XIONG Shou-mei,XU Qing-yan,KANG Jin-wu.The Simulation Technology of Casting Process. . 2004
7Flitta I,,Sheppard T.Effect of pressure and temperature variations onFEM prediction of deformation during extrusion. Materials Scienceand Technology . 2005
8Duan X J,Velay X,Sheppard T.Application of finiteelement method in the hot extrusion of aluminium alloys. Ma-ter.Sci.and Eng.A . 2004
9M. Shiomi,D. Takano,K. Osakada,M. Otsu.Forming of aluminium alloy at temperatures just below melting point. International Journal of Machine Tools & Manufacture . 2003
10EM Herba,HJ McQueen.Influence of particulate reinforcements on 6061 materials in extrusion modeling. Materials Science and Engineering A: Structural Materials:Properties, Microstructure and Processing . 2004

引证文献2

1齐乐华,刘健,关俊涛,苏力争,周计明.Damage prediction for magnesium matrix composites formed by liquid-solid extrusion process based on finite element simulation[J].Transactions of Nonferrous Metals Society of China,2010,20(9):1737-1742. 被引量：6
2Jian-quan TAO,Yan-ping ZHANG,Fu-you FAN,Qiang CHEN.Microstructural Evolution and Mechanical Properties of AZ31 Magnesium Alloy Prepared by Casting-solid Extrusion Forging During Partial Remelting[J].Defence Technology（防务技术）,2013,9(3):146-152.

二级引证文献6

1成小乐,郑文达,杨建,庞俐,薛菲菲,王军,张立波.难变形合金挤压机最大挤压速度控制分析[J].重型机械,2013(6):25-27. 被引量：1
2关俊涛,齐乐华,刘健,周计明,卫新亮.Threshold pressure and infiltration behavior of liquid metal into fibrous preform[J].Transactions of Nonferrous Metals Society of China,2013,23(11):3173-3179. 被引量：2
3张立强,李落星,谭文芳,徐戎.铸造凝固界面换热系数求解的反热传导模型[J].中国有色金属学报,2014,24(1):82-90. 被引量：6
4Dun-ming Liao,Liu Cao,Tao Chen,Fei Sun,Yong-zhen Jia,Zi-hao Teng,Yu-long Tang.Radiation heat transfer model for complex superalloy turbine blade in directional solidification process based on finite element method[J].China Foundry,2016,13(2):123-132. 被引量：5
5鞠录岩,林浩瀚,李伟,张钊源,张维琨,张耀武.碳/玻混杂纤维铺层顺序对其复合材料力学性能的影响[J].兵器材料科学与工程,2024,47(1):25-30. 被引量：3
6冀晓磊,孟晓东,张荣强,邢昌勇,王琳,刘鑫霞,刘晓杰,郑宇航.熔模铸造ZL114A铝合金凝固过程界面换热系数研究[J].铸造技术,2024,45(4):395-400. 被引量：1

1朱世凤,王艳彬,陈嫚丽,赵志翔.等径角挤压制备AZ91D镁合金的组织与性能[J].精密成形工程,2011,3(3):1-4. 被引量：2
2唐超兰.等径角挤压镁合金组织和性能研究的新进展[J].轻合金加工技术,2009,37(10):9-11. 被引量：2
3王卫卫,宋建丽.Effect of friction on equal channel angular extrusion process[J].中国有色金属学会会刊：英文版,2005,15(S2):162-166.
4张建军,白朴存,田春雨,张秀云.等径角挤压有限元模拟模具应力分析[J].重型机械,2006(6):46-48. 被引量：1
5Fan Zhiguo Jiang Hong Xie Chaoying.Super-Elasticity Characteristics of TiNi Alloy Processed by Equal Channel Angular Extrusion[J].稀有金属材料与工程,2009,38(A03):123-128.
6居志兰,戈晓岚,许晓静.ECAP细化晶粒法的仿真与分析[J].材料科学与工程学报,2003,21(2):255-258. 被引量：24
7胡红军,张丁非,潘复生.Die structure optimization of equal channel angular extrusion for AZ31 magnesium alloy based on finite element method[J].Transactions of Nonferrous Metals Society of China,2010,20(2):259-266. 被引量：9
8吴昆,胡小石,郑明毅.Mechanical properties and damping capacities of magnesium alloys processed by equal channel angular extrusion(ECAE)[J].中国有色金属学会会刊：英文版,2005,15(S2):276-279. 被引量：4
9J.Nemati,G.H.Majzoobi,S.Sulaiman,B.T.H.T.Baharudin,M.A.Azmah Hanim.Effect of equal channel angular extrusion on Al-6063 bending fatigue characteristics[J].International Journal of Minerals,Metallurgy and Materials,2015,22(4):395-404.
10姜巨福,罗守靖.Microstructure evolution of processed Mg-Al-Zn alloy by equal channel angular extrusion in semi-solid isothermal treatment[J].Transactions of Nonferrous Metals Society of China,2006,7(6):1313-1319. 被引量：9

Acta Metallurgica Sinica(English Letters)

2010年第1期

浏览历史

内容加载中请稍等...