期刊文献+

超声频率对铝熔体除气影响的试验研究 被引量:6

Effects of Ultrasonic Frequency on Degassing Process of Aluminum Melts
在线阅读 下载PDF
导出
摘要 在不同温度区间下向99.7%的工业纯铝和7050铝合金熔体中施加频率分别为15kHz和20kHz的相同功率超声波,利用 HYSCANⅡ测氢仪测量每次试验后熔体中的氢含量,进而探讨频率对铝熔体超声除气的影响规律及其作用机制。试验表明,超声作用能显著降低铸锭中的氢含量;熔体氢含量随着温度的升高而增大;熔体温度在660~720℃之间时,温度越低,除气效果越好,但是温度对除气效率影响不大;在相同功率和温度下,频率为15kHz的超声除气效率和除气效果都明显好于20kHz的。超声空化效应对产生大量的空化泡起着关键作用,超声频率对空化泡的长大以及熔体中氢的扩散具有重要作用。 With the help of the HYSCAN Ⅱ apparatus to measure hydrogen content in every experimented melt,effects and mechanism of ultrasonic vibration with varied frequency on the degassing process of commercial pure Al(99.7% in weight)and 7050 aluminum alloy melt were investigated by introducing ultrasonic in different temperature ranges.The results reveal that hydrogen content in the melt is evidently decreased after ultrasonic treatment.Hydrogen content in the melt is increased with rising in temperature.When melt temperature is located at 660~720℃,degassing effects are increasingly improved with decreasing in temperature,however,degassing efficiency is almost independent of the melt temperature.At fixed power and temperature,degassing effects and efficiency with 15Hz are obviously superior to those with 20Hz.The ultrasonic cavitation plays an important role in generating plenty of cavitation bubbles,furthermore,frequency exhibits a decisive role in cavitation bubble growth and in diffusion of hydrogen in melt.
出处 《特种铸造及有色合金》 CAS CSCD 北大核心 2010年第11期981-984,共4页 Special Casting & Nonferrous Alloys
基金 国家重点基础研究发展计划(973计划)资助项目(2010CB731700)
关键词 超声除气 频率 HYSCANⅡ测氢仪 空化效应 气泡长大 氢扩散 Ultrasonic Degassing,Frequency,HYSCANII Apparatus for Hydrogen Measurement,Cavitation Effects,Bubble Growth,Hydrogen Diffusion
  • 相关文献

参考文献12

  • 1XU H B, HAN Q Y, THOMAS T M. Effects of ultrasonic vibration on degassing of aluminum alloys [J]. Materials Science and Engineering, 2008, 473 :96- 104.
  • 2HeLDER P,JOAQUIM B, SEABRA E, et al. The influence of processing parameters on the ultrasonic degassing of molten AlSi9Cu3 aluminum alloy[J].Materials Letters,2009,63:806- 808.
  • 3NAJI MEIDANI A R, HASAN M. A study of hydrogen bubble growth during ultrasonic degassing of Al- Cu alloy melts [J]. Jour nal of Materials Processing Technology, 2004, 147:311-320.
  • 4李争彩,林书玉.超声空化影响因素的数值模拟研究[J].陕西师范大学学报(自然科学版),2008,36(1):38-42. 被引量:46
  • 5ESKIN G I. Ultrasonic Treatment of Light Alloy Melts[M].Ame sterdam:Gordon and Breach Science Publishers, 1998.
  • 6XU H B, JIAN X G, THOMAS T M. Degassing of molten alumihum A356 alloy using ultrasonic vibration [J]. Materials Letters, 2004, 58:3 669-3 673.
  • 7ESKIN G I. Cavitation mechanism of ultrasonic melt degassing[J]. Ultrasonics Sonochemistry, 1995,2 (2) : 137-141.
  • 8THOMPS ON L H, DORA IS WAMYL K. Sono- chemistry-sei ence and engineering [J].Industry Engineering Chemical Research, 1999, 38:1 215 -1 249.
  • 9LI J W, MOMONO T, YOSHINORI T,et al. Application of ultrasonic treating to degassing of metal ingotsg[J]. Materials Letters, 2008,62:4 152- 4 154.
  • 10CRUM L A. Rectified diffusion [J].Ultrasonics , 1984,22: 215- 223.

二级参考文献19

共引文献48

同被引文献91

引证文献6

二级引证文献24

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部