期刊文献+

导流型垂直轴风力机气动特性的数值研究 被引量:7

Numerial investigation on aerodynamic performance of the vertical axis wind turbine with guiding impeller
在线阅读 下载PDF
导出
摘要 分析了传统垂直轴风力机效率低的原因,并数值研究了带有导叶的导流型垂直轴风力机的气动性能.研究结果表明,导叶不仅可以有效地降低因来流对动叶轮吸力面的直接冲击而造成的阻力扭矩,而且还有助于改善来流对动叶轮压力面的有效冲击,这些均使该风力机动叶轮的旋转扭矩得到显著增加.因此,导流型垂直轴风力机可以有效克服传统垂直轴风力机性能上的缺陷,有望提高其风能利用效率. The reason of why the vertical axis wind turbine(VAWT) is always with low efficiency was analysed and moreover a new type of VAWT with guiding impeller was proposed.The computational fluid dynamics technique was introduced to investigate its aerodynamic performance.The results indicate that the guiding impeller can not only keep the rotor away from the direct impact of coming flow on its suction section,resulting in drag torque,but also improve the effective impact of coming flow on the pressure section of the rotor,both of which contribute to the enhancement of driving torque.So this type of VAWT can smooth away the defects of traditional VAWT and hopefully improve its efficiency.
出处 《上海理工大学学报》 CAS 北大核心 2010年第5期423-426,432,共5页 Journal of University of Shanghai For Science and Technology
关键词 垂直轴风力机 导流叶片 气动性能 数值研究 vertical axis wind turbine guiding impeller aerodynamic performance numerical investigation
  • 相关文献

参考文献4

  • 1田海姣,王铁龙,王颖.垂直轴风力发电机发展概述[J].应用能源技术,2006(11):22-27. 被引量:66
  • 2蒋本华.导流式全风向垂直轴风力机:中国,ZL200620006299.2[P].2007-02-21.
  • 3李庆宜.小型风力发电机[M].北京:机械工业出版社,1982.
  • 4WANG Qikun, CHEN Kangmin. Numerical investigation of aerodynamic performance influenced by circumferentially pre-swirling coming flow on the crossover and deswirling cascade of a multistage centrifugal compressor [J].Frontiers of Energy and Power Engineering in China, 2007,1 (4): 435 - 440.

二级参考文献5

  • 1李俊峰,时璟丽,施鹏飞.风力12在中国[M].化学工业出版社,2005:1-2,105.87.
  • 2U.S.Department of energy,Sandia National Laboratories and American Wind Energy Associotion.The History of the DOE program.Vertical Axis Wind Turbine.
  • 3张显双.风能的利用[M].物理世界.人民教育出版社,2004.
  • 4倪受元.风力机的类型与种类[D].风力发电讲座,7-8.
  • 5孔宪文,高峰.提高风力发电机组发电量的研究[J].东北电力技术,2002,23(8):31-34. 被引量:9

共引文献65

同被引文献51

  • 1蒋本华.导流式全风向垂直轴风力机[P].中国:200620006299.2,2007-2-21.
  • 2范正平.垂直轴微风发电机的叶片设计与模拟分析[D].厦门:厦门大学,2008.
  • 3张亮,孙科,罗庆杰.潮流水轮机导流罩的水动力设计[J].哈尔滨工程大学学报,2007,28(7):734-737. 被引量:27
  • 4Sivasegaran S,Sivapalan S.Augmentation of Powerin Slow-running Vertical-axis Wind Rotors UsingMultiple Vanes[J].Wind Engineering,1983,7(1):12-19.
  • 5Aitan B D,Atilgan M,zdamar A.An Experimen-tal Study on Improvement of a Savonius Rotor Per-formance with Curtaining[J].Experimental Ther-mal and Fluid Science,2008(32):1 673-1 678.
  • 6朱筱超.导风式风力机[P].中国专利:CN87207035.7,1989-08-02.
  • 7北京大学数学力学系数学专业概率统计组.正交设计[M].北京:人民教育出版社,1976.16-17.
  • 8M J KHAN,M T IQBAL,J E QUAICOE.River curvent energy conversion systems: progress, prospects and challenges [J]. Renewable and Sustainable Energy Reviews, 2008 (12) : 2177-2193.
  • 9M EL-SAMANOUDY, A A E GHORAB, SH Z YOUSSEF. Effect of some design parameters on the performance of a giromill vertical axis wind turbine [J]. Ain Shams Enigeering Journal, 2010( 1 ) : 85-95.
  • 10YELI, SANDER M CALISAL. Three-dimensional effects and arm effects on modeling a vertical axis tidal current turbine[J].Renewable Energy, 2010 (35) : 325- 330.

引证文献7

二级引证文献17

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部