期刊文献+

以石墨为造孔剂多孔Al_2O_3陶瓷体系中晶粒生长的研究 被引量:2

Research on Grain Growth in Porous Alumina Ceramics Using Graphite as Pore-forming Agent
在线阅读 下载PDF
导出
摘要 针对多孔A l2O3陶瓷两相体系,研究了烧结温度、保温时间和石墨含量对陶瓷气孔率、晶粒尺寸的影响。结果表明:随着烧结温度的升高和保温时间的延长,晶粒尺寸增大而气孔率下降;随着石墨含量的增加,气孔率明显提高而晶粒尺寸变化不明显。在此基础上,通过进一步拟合晶粒生长和时间的双对数线性关系,得出在1300℃时多孔A l2O3陶瓷的晶粒生长指数为2.95,与理论值基本吻合。 The effect of sintering temperature,holding time and content of graphite on the porosity and grain size of the ceramics in graphite-alumina biphasic system were investigated.The results showed that the grain size increased and porosity decreased as sintering temperature or holding time increasing.With the increase of graphite content,porosity obviously increased,while the grain size did not obviously change.On the basis of above experiments,the logarithmic relationship between grain growth and holding time was simulated.It was found that the grain growth index of porous alumina is 2.95,which is basically tallies with theoretical value.
出处 《人工晶体学报》 EI CAS CSCD 北大核心 2010年第5期1176-1180,共5页 Journal of Synthetic Crystals
基金 山西省国际科技合作项目(No.2007081029 No.2009081046)
关键词 AL2O3陶瓷 石墨 晶粒尺寸 气孔率 Al2O3 ceramic graphite grain size porosity
  • 相关文献

参考文献14

二级参考文献25

  • 1施剑林,J Eur Ceram Soc,1994年,14卷,505页
  • 2施剑林,J Mater Sci,1993年,28卷,2期,342页
  • 3施剑林,Ceram Soc,1991年,74卷,5期,994页
  • 4Fang T T,Ceram Int,1989年,15卷,329页
  • 5施剑林,Ceram Int,1989年,15卷,107页
  • 6Zheng J,J Am Ceram Soc,1989年,72卷,5期,810页
  • 7Zhao J,J Am Ceram Soc,1988年,71卷,7期,530页
  • 8施剑林,J Am Ceram Soc,1991年,74卷,5期,994页
  • 9Zhao J,J Am Ceram Soc,1988年,71卷,7期,530页
  • 10施剑林,Powder Technol,1993年,74卷,1期,7页

共引文献80

同被引文献19

  • 1王海东,张海,李海亮,汤育才.焙烧过程晶粒生长的Monte Carlo模拟[J].中国有色金属学报,2007,17(6):990-996. 被引量:6
  • 2Zhang D L,,Weng G A,Gong S P.Computer Simulation of Grain Growth of Intermediate-and Final-Stage Sintering and Ostwald Ripening ofBaTiO3-Based PTCR Ceramics. Journal of Materials Science . 2003
  • 3Braginsky M,TikareV,Olevsky E.Numerical Simulation of Solid State Sintering. International Journal of Solid and Structures . 2005
  • 4Kishino J,Nomura H,Shin S G,et al.Computational Study on Grain Growth in Cemented Carbides. International Journal of Refractory Metal&Hard Materials . 2002
  • 5Mori K,Matsubara H,Noguchi N.Micro-Macro Simulation of Sintering Process by Coupling Monte Carlo and Finite Element Methods. International Journal of Mechanical Sciences . 2004
  • 6TIKARE V,CAWLEY J.D.Numercial simulation of grain growth in liquid phase sintering materials-1.model. Acta Materialia . 1998
  • 7Xiong Z.X,Ji G.L,Fang X.Simulation of grain growth for ABO3 type ceramics. Journal of Materials Science . 2003
  • 8李大川,朱庆鹏,崔双科,同帜,周乃然.圆板型多孔α-Al_2O_3陶瓷膜支撑体的制备与表征[J].环境工程学报,2012,6(3):941-944. 被引量:11
  • 9李红伟,王伟,郭亚杰,耿刚强,金海云.造孔剂对多孔碳化硅陶瓷制备工艺和抗弯强度的影响[J].机械工程材料,2013,37(1):47-50. 被引量:12
  • 10同帜,朱庆鹏,李大川,崔双科.管式多孔α-Al2O3陶瓷膜支撑体的制备与性能表征[J].膜科学与技术,2013,33(2):6-11. 被引量:10

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部