摘要
采用单辊搅拌冷却技术(Shearing-cooling-rolling,简称SCR技术)和在线固溶处理方法制备Al-3Mg-0.5Sc合金线材,研究不同热处理工艺对合金线材的微观组织和力学性能的影响。结果表明:SCR技术对合金线材产生强烈的单辊剪切塑性变形,在铝基体中产生大量的位错及初生Al3Sc强化相粒子,初生Al3Sc强化相粒子与热处理过程中沉淀析出的大量更为细小的次生Al3Sc强化相粒子共同与位错交互作用。当合金线材采用T6(SCR成形、在线固溶并人工时效)热处理制度时,320℃时效2h后合金线材的抗拉强度为353MPa;当采用T8(SCR成形、在线固溶、冷拔加工并人工时效)热处理制度时,合金材料的抗拉强度为378MPa;当采用T9(SCR成形、在线固溶、人工时效并冷拔加工)热处理制度时,合金线材的抗拉强度为435MPa。
Al-3Mg-0.5Sc alloys wires were prepared by shearing-cooling-rolling（SCR） and on-line solution,the effects of heat treatment on the microstructures and mechanical properties of those alloy wires formed by SCR were studied.The results show that primary Al3Sc and dislocation are formed in alloy wire by SCR deformation,and the finer secondary Al3Sc dispersoids precipitated from the supersaturated solution in the treatment can effectively pin dislocation.After T6（SCR forming,on-line solution,aging） treatment at 320 ℃ for 2 h,the tensile strength is 353 MPa.After T8（SCR forming,on-line solution,drawing,aging） treatment,the tensile strength is 378 MPa.After T9（SCR forming,on-line solution,aging,drawing） treatment,the tensile strength is 435 MPa.
出处
《中国有色金属学报》
EI
CAS
CSCD
北大核心
2010年第9期1686-1691,共6页
The Chinese Journal of Nonferrous Metals
基金
国家自然科学基金与上海宝钢集团联合资助项目(50274020)
