期刊文献+

Preparation and properties of C/C-SiC brake composites fabricated by warm compacted-in situ reaction 被引量:4

Preparation and properties of C/C-SiC brake composites fabricated by warm compacted-in situ reaction
在线阅读 下载PDF
导出
摘要 Carbon fibre reinforced carbon and silicon carbide dual matrix composites(C/C-SiC) were fabricated by the warm compacted-in situ reaction.The microstructure,mechanical properties,tribological properties,and wear mechanism of C/C-SiC composites at different brake speeds were investigated.The results indicate that the composites are composed of 58wt%C,37wt%SiC,and 5wt%Si.The density and open porosity are 2.0 g.cm^(-3) and 10%,respectively.The C/C-SiC brake composites exhibit good mechanical properties.The flexural strength can reach up to 160 MPa,and the impact strength can reach 2.5 kJ.m^(-2).The C/C-SiC brake composites show excellent tribological performances.The friction coefficient is between 0.57 and 0.67 at the brake speeds from 8 to 24 m·s^(-1).The brake is stable,and the wear rate is less than 2.02×10^(-6) cm^3·J^(-1).These results show that the C/C-SiC brake composites are the promising candidates for advanced brake and clutch systems. Carbon fibre reinforced carbon and silicon carbide dual matrix composites(C/C-SiC) were fabricated by the warm compacted-in situ reaction.The microstructure,mechanical properties,tribological properties,and wear mechanism of C/C-SiC composites at different brake speeds were investigated.The results indicate that the composites are composed of 58wt%C,37wt%SiC,and 5wt%Si.The density and open porosity are 2.0 g.cm^(-3) and 10%,respectively.The C/C-SiC brake composites exhibit good mechanical properties.The flexural strength can reach up to 160 MPa,and the impact strength can reach 2.5 kJ.m^(-2).The C/C-SiC brake composites show excellent tribological performances.The friction coefficient is between 0.57 and 0.67 at the brake speeds from 8 to 24 m·s^(-1).The brake is stable,and the wear rate is less than 2.02×10^(-6) cm^3·J^(-1).These results show that the C/C-SiC brake composites are the promising candidates for advanced brake and clutch systems.
出处 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2010年第4期500-505,共6页 矿物冶金与材料学报(英文版)
基金 supported by the National High-Tech Research and Development Program of China(No.2006AA03Z560) the Graduate Degree Thesis Innovation Foundation of Central South University(No.2008yb019)
关键词 C/C-SIC ceramic matrix composites tribological properties MICROSTRUCTURE C/C-SiC ceramic matrix composites tribological properties microstructure
  • 相关文献

参考文献15

  • 1P.P.Yao,H.C.Sheng,X.Xiong,and B.Y.Huang,Worn surface characteristics of Cu-based powder metallurgy bake materials for aircraft,Trans.Nonferrous Met.Soc.China,17(2007),No.1,p.99.
  • 2W.Krenkel,B.Heidenreich,and R.Renz,C/C-SiC composites for advanced friction systems,Adv.Eng.Mater.,4(2002),No.7,p.427.
  • 3C.Blanco,J.Bermejo,H.Marsh,and R.Menendez,Chemical and physical properties of carbon as related to brake performance,Wear,213(1997),p.1.
  • 4J.D.Chen,J.H.C.Chem,and C.P.Jn,Effect of humidity on the tribological behavior of carbon-carbon composites,Wear,193(1996),p.38.
  • 5B.K.Yen,Influence of water vapor and oxygen on the tribology of carbon materials with sp2 valence configuration,Wear,192(1996),p.208.
  • 6S.Vaidyaraman,M.Purdy,T.Walker,and S.Horst,C/SiC material evaluation for aircraft brake applications,[in] The 4th International Conference on High Temperature Ceramic Matrix Composites (HT-CMC4) Proceedings,Munich,2001,p.802.
  • 7W.R.Jones and M.J.Jansen,Tribology for space applications,Proc.Inst.Mech.Eng.Part,J,222(2008),No.8,p.997.
  • 8R.Cadow,Current status and future prospects of CMC brake composites and their manufacturing technologies,Ceram.Eng.Sci.Proc.,21 (2000),No.3,p.15.
  • 9Z.Stadler,K.Kmel,and T.Kosmac,Friction behavior of sintered metallic brake pads on a C/C-SiC composite brake disc,J.Eur.Ceram.Soc.,27(2007),No.2-3,p.1411.
  • 10Z.Li,P.Xiao,X.Xiong,and S.H.Zhu,Tribological characteristics of C/C-SiC braking composites under dry and wet conditions,Trans.Nonferrous Met.Soc.China,18(2008),No.5,p.1071.

同被引文献35

引证文献4

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部