期刊文献+

一种新型2R完全解耦并联机构的运动学和奇异性分析 被引量:12

Kinematics and Singularity Analysis of a Novel 2R Fully-decoupled Parallel Manipulator
在线阅读 下载PDF
导出
摘要 提出了一种完全解耦的二维转动并联机构。基于自由度特征矩阵分析了机构运动类型,运用单开链法确定了机构的自由度和主动副,同时求解了机构的位置和速度,并根据正逆雅可比矩阵系统分析了机构的奇异位形。由于该机构的全局雅可比矩阵为三角阵,该机构的运动完全解耦,因此可以简化机器人轨迹规划和控制。 This paper presented a novel two degree-of-freedom (DOF) fully-decoupled parallel mechanism(PM) with two dimensional rotation. First,based on the DOF feature matrix kinematic type was analyzed, and using single open-chain theory the calculation of the DOF of the mechanism and selection of the actuated pairs were performed. Next, the displacement and velocity of the mechanism were analyzed,and according to the direct and the inverse Jacobian matrices of the manipulator singularity conditions were discussed systematically. At last the motion of the mechanism was fully decoupled for the Jacobian matrix being a triangular matrix,which can simplify control and trajectory planning of the mechanism.
出处 《中国机械工程》 EI CAS CSCD 北大核心 2010年第11期1301-1305,共5页 China Mechanical Engineering
基金 国家自然科学基金资助项目(50575180) 陕西省重点学科建设专项基金资助项目 西安理工大学优秀博士学位论文研究基金资助项目(102-210911)
关键词 并联机构 完全解耦 运动学分析 奇异性分析 parallel mechanism fully- decoupled kinematics analysis singularity analysis
  • 相关文献

参考文献6

二级参考文献32

  • 1YUJingjun,ZHAOTiesheng,BIShusheng,ZONGGuanghua,HUANGZhen.Type synthesis of parallel mechanisms with three translational degrees of freedom[J].Progress in Natural Science:Materials International,2003,13(7):536-545. 被引量:3
  • 2汪劲松,关立文,王立平,李铁民.并联机器人机构构型创新设计研究[J].机械工程学报,2004,40(11):7-12. 被引量:17
  • 3黄田,李曚,吴孟丽,梅江平,赵学满,Hu S.Jack.可重构PKM模块的选型原则——理论与实践[J].机械工程学报,2005,41(8):36-41. 被引量:41
  • 4杨斌久,蔡光起,罗继曼,朱春霞.少自由度并联机器人的研究现状[J].机床与液压,2006(5):202-205. 被引量:53
  • 5[1]Clavel R, DELTA. A Fast Robot with Parallel Geometry [A]. Proc. of the Int. Symp. on Industrial Rob. Switzerland, 1998, 91 - 100.
  • 6[2]Gosselin C M, Angeles J. The Optimum Kinematic Design of a Planar Three- Degree- of- Freedom Parallel Manipulator [J]. ASME, J. Mechanisms, Transmiss. Automat. Design. 1988, 110 (1): 35-41.
  • 7[3]Gosselin C M, Angeles J. The Optimum Kinematic Design of a Spherical Three- Degree- of- Freedom Parallel Manipulator [J]. ASME, J. Mechanisms, Transmiss. Automat Design. 1989, 111 (2): 202-207.
  • 8[4]Huang Z, Li Q C. Some Novel Lower- Mobility Parallel Mechanisms [A]. Proc. of DECT' 02 ASME 2002 Design Engineering Technical Conferences. September 29 -October 2, Montreal, Canada. 2002.
  • 9[5]H. Asada and K. Youcef- Toumi, Analysis and Design of a Derict - Drive Arm with a Five - Bar - Link Parallel Drive Mechamism [ J]. Journal of Dynamic Systems,Measurement and Control, 1984, 106: 225- 230.
  • 10[6]Fen Gao, et al., New Kinematic Structures for 2- , 3 - ,4-, and 5 - DOF Parallel Manipulator Designs [J].Mechanism and Machine Theory , 2002, 37: 1395-1411.

共引文献18

同被引文献93

引证文献12

二级引证文献79

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部