期刊文献+

磁悬浮运动平台的磁场分析及优化设计(英文) 被引量:10

Magnetic Field Analysis and Optimization Design of Magnetic Stage
在线阅读 下载PDF
导出
摘要 研制了一种新型磁悬浮平台,该平台定子采用无铁心式的克莱姆绕组,消除了固有齿槽效应,动子采用Halbach 磁阵列结构方式,由于平台输出推力与悬浮的稳定性主要与其气隙磁场的分布情况有直接关系,因此提高气隙磁场的正弦分布是改善其工作特性的难点和重点. 为了改善气隙磁场的分布问题,提出了一个优化磁场分布的目标函数,并采用步长加速法对平台磁场进行了优化设计,大大降低了磁场谐波分量,改善了气隙磁场分布状态. 将优化结果运用到实际的平台中,对该运动平台进行了阶跃响应实验,实验结果表明满足平台需要达到纳米级精度的要求. A novel magnetic stage was proposed,its stator is designed with ironless windings,and this stage eliminates the torque due to slot effect. Its rotor adoptes Halbach magnetic array. The torque and suspend stability of stage are related to the sine level of air gap magnetic field distribution,so how to strengthen the sine level of air gap magnetic field distribution is the emphasis and difficulty in improving its performance characteristic. In order to improve the distribution of air gap magnetic field,a further objective function of the field is proposed in this paper,and the step acceleration method is used to further optimize the magnetic field of the stage. The magnetic field distribution was greatly improved after the secondary optimization with much lower harmonic component of the magnetic field. The result of step response experiment shows that the magnetic stage meets the requirements for movement in the nanometer range.
出处 《纳米技术与精密工程》 EI CAS CSCD 2010年第3期221-225,共5页 Nanotechnology and Precision Engineering
基金 国家自然科学基金资助项目(60674052)
关键词 磁悬浮平台 Halbach磁阵列 步长加速法 优化设计 magnetic stage Halbach magnet array step acceleration method optimization design
  • 相关文献

参考文献3

二级参考文献21

  • 1冯晓丹,张玉,张黔.线切割加工对模具工作表面的影响及后处理[J].模具工业,2004,30(9):51-54. 被引量:16
  • 2高宏 李庆祥 等.亚微米弹性微位移工作台系统的设计及精度分析[J].清华大学学报,1988,28(5):19-28.
  • 3薛实福 李庆祥主编.精密仪器设计[M].北京:清华大学出版社,1989..
  • 4[1]Kazuhiro Takahashi,Makoto Mita,Hiroyuki Fujita,et al.A high fill-factor comb-driven XY-stage with topological layer switch architecture[J].IEICE Electronics Express,2006,3 (9):197-202.
  • 5[2]Gu Lei,Li Xinxin,Bao Haifei,et al.Single-wafer-processed nano-positioning XY-stages with trenchsidewall micromachining technology[J].J Micromech Microeng,2006,16 (7):1349-1357.
  • 6[3]Hah Dooyoung,Choi Chang-Auch,Kim Chang-Kyu,et al.A self-aligned vertical comb-drive actuator on an SOI wafer for a 2D scanning micromirror[J].J Micromech Microeng,2004,14 (8):1148-1156.
  • 7[4]Kim Chen-Heung,Kim Yong-Kweon.Micro XY-stage using silicon on a glass[J].J Micromech Microeng,2002,12 (2):103-107.
  • 8[5]Choi Jae-joon,Park Hongsik,Kim Kyu Yong,et al.Electromagnetic micro x-y stage for probe based data storage[J].Journal of Semiconductor Technology and Science,2001,1 (1):84-93.
  • 9[6]Legtenberg R,Groeneveld A W,Elwenspoek M.Combdrive actuators for large displacements[J].J Micromech Microeng,1996,6 (4):320-329.
  • 10[7]Fedder G K.Simulation of Microelectromechanical Systerns[D].Berkeley:Electrical Engineering and Com-puter Sciences,University of California,1994.

共引文献21

同被引文献61

引证文献10

二级引证文献29

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部