期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

多相体系聚合物相形态演变及其机理研究进展 被引量：1

Research Progress on Phase Morphology Evolution and Mechanism of Multi-phase Polymer System
在线阅读 下载PDF
导出
摘要 重点论述了共混过程中相形态的演变和注塑制品的多层形态结构的演变,提出了可以用于形态演变模拟、成型模拟与制品性能预测的流变学模型,这将是高分子物理领域的一个发展方向。 The evolution of phase morphology during blending and the evolution of multi-layer morphology of injection moulded product were discussed in detail.The rheological model for morphology evolution simulation,moulding simulation and product property prediction was presented,which would be one of the development direction of polymer physics.
作者 汪玲 应继儒 黄颖婷 李欢
机构地区 湖北工业大学化学与环境工程学院
出处 《塑料科技》 CAS 北大核心 2010年第2期94-98,共5页 Plastics Science and Technology
基金 国家自然科学基金重大项目(20490220) 华中科技大学塑性成型模拟及模具技术国家重点实验室开放课题(05-10)资助
关键词 多相体系聚合物 相形态 演变 流变学模型 Multi-phase system polymer Phase morphology Evolution Rheological model
分类号 TQ311 [化学工程—高聚物工业]
  • 相关文献

参考文献31

  • 1王国全,王秀芬.聚合物改性[M].北京:中国轻工业出版社,2007.
  • 2Kim B K,Kim M S,Kim K J.Viscosity effect in polyolefin ternary blends and composites[J].J Appl POlym Sci,1993,48:1271-1275.
  • 3Wu S H.Formation of dispersed phase in incompatible polymer blends:interfacial and theological effects[J].Polym Eng Sci,1987,27:235-239.
  • 4Bourry,Favis.Morphology development in a polyethylene/polystyrene binary blend during tein-screw extrusion[J].Polymer,1998,39(10):1851-1856.
  • 5Plochcki A P,Dagli S S,Andrews R D.The interface in binary mixtures of polymers containing corresponding block copolymer:effects industrial mixing processes and of coalescence[J].POlym Eng Sci,1990,30:741-752.
  • 6程振刚,王琪.聚甲醛/热塑性聚氨酯弹性体在双螺杆挤出机共混中相形态的形成机理[J].高分子材料科学与工程,2006,22(5):201-204. 被引量：12
  • 7徐新宇,鲍晓暹,郐羽,孙树林,杨海东,张会轩.环氧官能化(乙烯/辛烯)共聚物增韧PBT的研究[J].工程塑料应用,2005,33(4):4-7. 被引量：6
  • 8Porfyrakis K,Assender H E,Robinson I M.The interrelationshiP between processing conditions.microstructure and mechanical properties for injection moulded rubber-toughened poly(methyl methacrylate)(RTPMMA)samples[J].Polymer,2002,43(17):4769-4781.
  • 9Karger Kocsis J,Csikai I.Skin-Core morphology and failure of injection-molded specimens of impact-modified polypropylene blends[J].Polym Eng Sci,1987,27(4):241-253.
  • 10Martuscelli E.Influence of composition,crystallization conditions and melt phase structure on solid morphology,kinetics of crystallization and thermal behavior of binary polymer/polymer blends[J].Polym Eng Sci,1984,24(8):563-586.

二级参考文献48

  • 1马晓燕,梁国正,曹中林,鹿海军,袁莉.聚丙烯/聚烯烃弹性体共混物非等温结晶动力学及力学性能研究[J].中国塑料,2004,18(7):11-15. 被引量：9
  • 2何曼君 陈维孝.高分子物理[M].复旦大学出版社,1991.301.
  • 3Mark H F, Bikales N M, Overberger C G, et al. Encyclopedia of Polymer Science and Engineering( Vol12 ). New York : Wiley, 1986.
  • 4Van Berkel R W M, Van Hartigsveldt E A A, Van der Sluijs C L.Handbook of Thermoplastics. New York :Marcel Dekker,1997.
  • 5Arostegui A, Gaztelumendi M, Nazabal J. Toughened poly (butylene terephthalate) by blending with a metallocenic poly(ethylene-octene)copolymer. Polymer, 2001,42:9 565.
  • 6Arostegui A, Nazabal J. Compatibilization of a poly( butylene terephthalate)/poly(ethylene-octene) copolymer blends with different amounts of an epoxy resin. Journal of Applied Polymer Science, 2004,91:260.
  • 7Arostegui A, Nazabal J. Stiffer and super-tough pely( butylene terephthalate) based blends by modification with phenoxy and maleated poly(ethylene-octene) copelymers. Polymer,2003,44:239.
  • 8Wang X H, Zhang H X, Wang Z G, et al. Toughening of poly( butylene terephthalate) with epoxidized ethylene propylene diene rubber.Polymer, 1997,38 : 1 569.
  • 9Takashi A, Greco R, Ragosta G, et al. Strain recovery mechanism of PBT/rubber thermoplastic elastomer. Polymer, 1999,40:3 657.
  • 10Majumdar B, Paul D R. Polymer Blends ( Vol1 ). New York : Wiley,2000.

共引文献42

同被引文献9

引证文献1

塑料科技
2010年 第2期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部