期刊文献+

客车车身结构侧翻过程数值模拟 被引量:5

Simulation Study on Rollover Crashworthiness of A Bus Body
在线阅读 下载PDF
导出
摘要 客车车顶塌陷侵入性变形是客车侧翻时造成严重人员伤亡的主要原因.依据客车侧翻试验标准,基于非线性有限元数值方法研究客车车身结构的被动安全性.在数值模拟客车侧翻过程中,采用刚体—弹性体转化技术,既加快求解速度,同时又可以采用更小的时间步长得到更精确的结果.某客车车身结构侧翻碰撞数值仿真结果表明:客车上部结构不满足法规ECE R66的要求,应增强该部位结构的刚度,确保最大生存空间以保护乘客生命安全. Collapse deformation of a bus roof is the main reason to cause serious casualties for a bus rollover accident.According to the standard of bus rollover test,rollover crashworthiness of a bus body is studied by means of nonlinear finite element numerical method.In order to decrease the solving time and obtain more accurate results,rigid-elastomer conversion technology is employed to simulate a bus rollover crashworthiness.The simulation results show that the bus body skeleton and the living space have mutual penetration,and rollover crashworthiness of the bus does not meet the requirements of ECE R66.Some suggestions are given to enhance structure stiffness to enlarge the passenger living space.
出处 《大连交通大学学报》 CAS 2010年第2期1-4,共4页 Journal of Dalian Jiaotong University
基金 铁道部科技计划资助项目(2009J005-C) 辽宁省重点实验室资助项目(2008S037)
关键词 车身结构 侧翻 有限元 耐撞性 body structure rollover FEA crashworthiness
  • 相关文献

参考文献5

二级参考文献16

共引文献24

同被引文献42

  • 1刘金朝,王成国.城市轨道车辆防碰撞性研究[J].现代城市轨道交通,2005(2):36-40. 被引量:19
  • 2高水德,张绍理,姚常青.国外客车被动安全研究[J].客车技术与研究,2006,28(3):7-10. 被引量:20
  • 3何汉桥,张维刚.高床大客车侧翻结构安全性仿真研究[J].机械科学与技术,2007,26(7):922-925. 被引量:30
  • 4顾慰慈.挡土墙主动土压力作为空间问题的一种计算方法[J].土木工程学报,1985,18(2):66-75.
  • 5GB/T.17578-1998,客车上部结构强度的规定[S].北京:中国标准出版社,1998.
  • 6张文笔.敞车侧柱结构的静、动力分析[J].铁道学报,1984(6):1-13.
  • 7张文笔.C61型敞车侧柱结构的静、动强度计算[J].铁道学报,1984(1):11-21.
  • 8GOODEY R J, BROWN C J, ROTTER J M. Verification of a 3-dimensional model for filling pressures in square thin-walled silos[J]. Eng Struct, 2003, 25: 1773-1783.
  • 9MENG Q, JOFRIET J C, NEGI S C. Finite element analysis of bulk solids flow: Part. 1 development of a model based on a secant constitutive relationship[J]. J Agric Eng Res, 1997, 67(2): 141-50.
  • 10SCHURICHT T H, FURLL C H, ENSTAD G G Numerical simulation with extension of the bulk material model and full scale silo tests for optimisation of the "cone in cone" concept[C]//Proceedings of the World Congress on Particle Technology. Sydney, Australia, 2002: 21-25.

引证文献5

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部