摘要
改进传感器检测电容几何结构能有效改善传感器的性能。本文对梳齿电极结构、栅形电极结构及梳栅电极结构检测电容的性能特点进行分析比较,重点分析了振子质量、空气阻尼、系统阻尼系数比以及灵敏度等特性,得出在相同的外轮廓尺寸、支撑梁、振子厚度以及振子到衬底的距离的条件下,栅形结构传感器的振子质量最大,空气阻尼最小,适合制作高分辨率的传感器;在大气下,梳齿结构灵敏度增加的同时空气阻尼力也会增加,且振子质量较小,适合制作高灵敏度,低分辨率传感器结构;梳栅结构的特点居于两者之间,适合制作需要兼顾分辨率和灵敏度的传感器。通过实例计算,证明了该结果。
Optimizing the structure of a sensing capacitance can improve the performances of MEMS accelerometer. The characteristics of MEMS capacitive accelerometers with comb,bar and comb-bar capacitances,respectively,have been analyzed. The proof mass,air damping and damping ratio of the three different sensor structures are compared on the condition of same dimension,elastic constant of the spring,thickness of the proof mass,distance between the proof mass and the substrate. The results show that the proof mass of bar capacitance sensor is largest,and its air damping is least,which is suitable for high-precise sensor. The sensitivity of comb capacitance sensor in air is increased while the air damping is increased too,so it is suitable for high-sensitivity and low-precise sensor. The comb-bar capacitance is suitable for the sensors which need both high sensitivity and precision. An example is taken to prove the results.
出处
《传感技术学报》
CAS
CSCD
北大核心
2010年第4期501-507,共7页
Chinese Journal of Sensors and Actuators
基金
国家自然科学基金资助项目资助(60506015)
浙江省自然科学基金资助项目资助(Y107105)
关键词
MEMS
微电容式惯性传感器
检测电容结构
MEMS
Micro capacitive inertial sensor
Structure of detecting capacitance
