期刊文献+

基于非成像光学的LED高收光率的抛物反射器研究 被引量:11

Research of High Light Collection Efficiency of LED Parabolic Reflector Based on Non-Imaging Optics
原文传递
导出
摘要 根据非成像光学理论,从能量传递的角度分析了发光二极管(LED)抛物反射器几何参数与LED绕垂直于光线传播方向轴旋转角度对能量收集率的影响,建立了统一的抛物反射器的光能利用率与几何参数及LED旋转角度的解析表达式。分析结果表明,利用光学扩展量来评价LED抛物反射器的能量收集率是合理的;通过旋转LED光源,可进一步提高光能收集率,抛物反射器的几何参数不同,其最佳的旋转角度也不同。仿真模拟结果与理论分析结论基本一致。 Based on the theory of non-imaging optics,the geometric parameters of light-emitting diode(LED) parabolic reflector and the impact of rotation angle of LED around the axis which is perpendicular to propagation direction on the efficiency of light collection are analysed in energy transfer aspect,and eventually unified closed relationships between efficiency of light collection of a parabolic reflector with the geometric parameters and the rotation angle are established.The results show that using étendue to evaluate the efficiency of energy collection of LED parabolic reflector is reasonable,and rotating the LED can further improve the efficiency,and for each different sets of geometric parameters,the best rotation angle is different.The simulation results are according with the theoretical analysis.
出处 《中国激光》 EI CAS CSCD 北大核心 2010年第3期680-684,共5页 Chinese Journal of Lasers
基金 浙江省自然科学基金(Y104436) 浙江省科技计划(2008C21158)资助课题
关键词 非成像光学 高效收光率 光学扩展量 发光二极管 抛物反射器 non-imaging optics high light collection étendue light-emitting diode parabolic reflector
  • 相关文献

参考文献16

  • 1F.M.Steranka,J.Bhat ,D.Collins et al..High power LEDs-technology status and market applications[J ].Physical Status Solid(A) Applied Research,2002,194(2):380-388.
  • 2Daniel A.Steigerwald,Jerome C.Bhat,Dave Collins et al..Illumination with solid state lighting technology [J ] .IEEE J.Sel.Top.Quantum.Electron.,2002,8(2):310-320.
  • 3Regina Mueller-Mach,Gerd O.Mueller.White light emitting diodes for illumination [C].SPIE,2000,3938:30-41.
  • 4Karsten Eichhorn.LEDs in automotive lighting[C].SPIE,2006,6134:613405.
  • 5屠大维,吴仍茂,杨恒亮,赵其杰,黄志华.LED封装光学结构对光强分布的影响[J].光学精密工程,2008,16(5):832-838. 被引量:53
  • 6卢盛林,张宪民.无铅焊点检测光源的分析与优化设计[J].光学精密工程,2008,16(8):1377-1383. 被引量:16
  • 7许文海,赵欢,芦永军.LED阵列式紫外固化光源光学系统设计[J].光学精密工程,2007,15(7):1032-1037. 被引量:26
  • 8丁毅,顾培夫.实现均匀照明的自由曲面反射器[J].光学学报,2007,27(3):540-544. 被引量:102
  • 9W.T.Welford,R.Winston.High Collection Nonimaging Optics [M] .New York :Academic Press,1989.
  • 10L.M.Bassett,W.T.Welford,R.Winston.Nonimaging optics for flux concentration[C].in Progress in Optics,E.Wolfetc,1989,27:161-226.

二级参考文献104

共引文献291

同被引文献91

  • 1骆健忠,陈哲,张永林,李丰丽,蔡昌.侧光平板式导光板散射网点设计及仿真分析[J].液晶与显示,2006,21(3):206-213. 被引量:25
  • 2李盼来,杨志平,王志军,郭庆林,李旭.用于白光LED的Sr_3SiO_5:Eu^(2+)材料制备及发光特性研究[J].科学通报,2007,52(13):1495-1498. 被引量:19
  • 3邹吉平.“LED道路照明灯具配光性能的误区分析”,中国道路照明论坛,164-167(2011).
  • 4N. Narendran, Yimin Gu. Life of LED-based white sources[J]. IEEE J. Display Technology, 2005, 1(1):167-171.
  • 5P. Raynham. An examination of the fundamental of road lighting for pedestrians and drivers [J ]. Lighting Research and Technology, 2004, 36(4) : 307-316.
  • 6International Commission on Illumination. Calculation and Measurement of Luminance and Illuminanee in Road Lighting, CIE Feb-30-1982 [S]. Vienna: CIE Publication,1982.
  • 7中华人民共和国建设部.城市道路照明设计标准CJJ45-2006[s].北京:国家标准出版社,2006.
  • 8International Commission on Illumination. Glare and Uniformity in Road Lighting Installations, CIE 31-1976 [S]. Paris: CIE Publication, 1976.
  • 9International Commission on Illumination. Road Lighting Calculations, CIE 140-2000 [S]. Vienna: CIE Publication, 2000.
  • 10Angel Pachamanov, Dessislava Pachamanova. Optimization of the light distribution of luminaries for tunnel and street lighting [J]. Engineering Optimization, 2008, 40(1): 47-65.

引证文献11

二级引证文献85

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部