摘要
微通道热沉是解决高功率半导体激光器阵列散热有效的途径,本文利用有限元方法研究半导体激光器的温度,给出了横向尺寸为200μm×60μm单个及间距100μm的3,5,9的微通道热沉中的温度,得到微通道数量影响激光器最高温度变化。结果表明,单个微通道构成的热沉可以把注入电流为36A稳态工作的激光器阵列冷却到342K,9个微通道可以冷却到306K。仿真了增加微通道间距的温度分布,发现为间距260μm的5个微通道热沉,可以将激光器冷却到308K。
The micro-channel heat sink is an effective way to solve the heat removal problem in high power semiconductor laser array. The temperature in a high power semiconductor laser is analyzed by the finite element method. The temperature is obtained in a single and 3,5,9 micro-channels heat sinks with the space of 100 μm and transverse size 200μm×60μm. The effect of number of micro-channels on maximum temperature is presented. The result shows that the temperature in the semiconductor lasers in 36 A injected current stable operation can be cooled down to 306 K by the heat sink made up of 9 micro-channels,while the temperature is dropped to 342 K for a single micro-channel. The temperature distribution is also simulated with increasing the space between micro-channels. It is found that the temperature can be dropped to 308 K by 5 micro-channels with the space of 260 μm.
出处
《光电工程》
CAS
CSCD
北大核心
2010年第1期106-109,114,共5页
Opto-Electronic Engineering
基金
教育部高等学校博士学科点专项科研基金(20070080001)
河北省自然科学基金(F2007000096)
关键词
高功率激光器阵列
微通道
温度
有限元法
激光器
high power laser array
micro-channel
temperature
finite element method
laser
