期刊文献+

三角翼后缘喷流对前缘涡破裂位置的影响

The effects of trailing edge jets on the vortex breakdown location over a delta wing
在线阅读 下载PDF
导出
摘要 采用高分辨率的N-S方程数值模拟方法,研究了亚声速来流条件下对称喷流、差动喷流、矢量喷流对60°后掠角三角翼前缘涡破裂位置的影响。结果表明,对称喷流条件下,喷流与来流的速度比影响前缘涡破裂位置;差动喷流情况下,速度大的一侧喷流对涡破裂位置起主要影响;矢量喷流情况下,喷流方向对涡破裂位置影响显著,喷流方向与涡轴方向一致时,涡破裂位置延迟量最多。 The effects of the trailing edge jet on the location of leading edge vortex breakdown over a 60° sweep delta wing at subsonic free flow are studied by solving the three dimensional Navier-Stokes equations. The used trailing edge jets include symmetrical jet, differential jet and vectored jet. It is found that the ratio of jet velocity to free flow velocity vi/v∞ affects the vortex breakdown location in symmetrical jet condition, which is different from tradition conclusions in water tunnel. In the case of the differential jet, the vortices breakdown locations are mostly determined by the jet with relative bigger speed. The angle of the jet has a dramatic effect on the vortex breakdown location when the vectored jet is selected. The vortex breakdown location is delayed most when the jet direction is consistent in the vortex axis position.
出处 《空气动力学学报》 EI CSCD 北大核心 2009年第5期561-565,共5页 Acta Aerodynamica Sinica
关键词 三角翼 对称喷流 差动喷流 矢量喷流 涡破裂 delta wing symmetrical jet differential jet vectored jet vortex breakdown
  • 相关文献

参考文献6

  • 1NAWROCKI D.Differential and vectored trailing edge jet control of delta wing vortices[R].AIAA-95-0008,1995.
  • 2ANTHONY M M.Control of leading-edge vortex breakdown by trailing edge injection[R].AIAA-99-3202,1999.
  • 3SHIH C,DING Z.Trailing-edge jet control of leadingedge vortices of a delta wing[J].AIAA Journal,1996,34(7):1447-1457.
  • 4AGRAWAL S,BARNETT R M,ROBINSON B A.Numerical investigation of vortex breakdown on a delta wing[J].AIAA Journal,1992,30,584-591.
  • 5HUMMEL D.On the vortex formation over a slender wing at large angles of incidence[R].AGARD-CPP-247,1979.
  • 6陈宇,阎超.后缘喷流对三角翼前缘涡影响的数值模拟[J].北京航空航天大学学报,2007,33(10):1170-1173. 被引量:3

二级参考文献7

共引文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部