期刊文献+

TA16和TA17钛合金热物理性能与温度的关系 被引量:24

Relationship between Temperature and Thermal Physical Properties of TA16 and TA17 Titanium Alloys
在线阅读 下载PDF
导出
摘要 在不同温度下对TA16和TA17钛合金的线膨胀系数、比热容、弹性模量、热扩散率和导热系数进行了测定和分析。结果表明:两种钛合金在100~500℃之间的平均线膨胀系数分别为9.638×10^-6℃^-1和9.224×10^-6℃^-1;在500℃以下,两者的线膨胀系数、比热容、热扩散率和导热系数均随温度的升高而增大,只有弹性模量随温度升高而减小;并用最小二乘法建立了在50~500℃之间的比热容、弹性模量、热扩散率、导热系数与温度之间的函数关系。 The linear expansion coefficient, specific heat, elastic modulus, thermal diffusivity and thermal conductivity of TA16 and TA17 titanium alloys were measured and analyzed at different tempeartures. The results show that the average linear expansion coefficient of TA16 and TA17 titanium alloys was about 9.638×10^-6℃^-1 and 9.224×10^-6℃^-1, respectively, in the range of 100--500℃. The linear expansion coefficient, specific heat, thermal diffusivity and thermal conductivity of TA16 and TA17 titanium alloys increased with temperature increasing. However elastic modulus decreased with temperature increasing. Functional relationships between specific heat, elastic modulus, thermal diffusivity and thermal conductivity in the range of 50- 500℃ were established by means of least square method.
出处 《机械工程材料》 CAS CSCD 北大核心 2009年第10期30-32,67,共4页 Materials For Mechanical Engineering
关键词 TA16钛合金 TA17钛合金 热物理性能 温度 TA16 titanium alloy TA17 titanium alloy thermal physical property temperature
  • 相关文献

参考文献5

二级参考文献11

  • 1孙建科,孟祥军,陈春和,刘茵琪.我国船用钛合金研究、应用及发展[J].金属学报,2002,38(z1):33-36. 被引量:52
  • 2杨蓬勃.钛合金在船舶上的应用[J].广东造船,2005,24(3):30-32. 被引量:4
  • 3王绍纯.自动检测技术[M].北京:冶金工业出版社,1984..
  • 4You Qingzhao,Proceeding of the 1st Asian Thermophysical Properties Conference,1986年,325页
  • 5王绍纯,自动检测技术,1984年
  • 6陈春和.船用钛合金的应用与发展[C].中国船舶重工集团公司第七二五研究所,1998..
  • 7杨学宁.苏联核潜艇[Z].中国船舶重工集团公司第七一九研究所,1999..
  • 8陈春和.船用钛合金的应用与发展[C].中国船舶重工集团公司第七二五研究所,1999..
  • 9张承濂.船舶材料手册[M].北京:国防工业出版社,1982.739.
  • 10胡耀君.发展中的船用钛合金[J].钛工业进展,1998,15(4):1-5. 被引量:10

共引文献70

同被引文献177

引证文献24

二级引证文献59

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部