期刊文献+

影响加氢柴油介电精制效率的因素 被引量:7

FACTORS IMPACTING ON THE EFFICIENCY OF DIELECTROPHORESIS TREATING OF DIESEL FUEL
在线阅读 下载PDF
导出
摘要 根据介电力学原理,在自行设计的介电动力学精制工艺实验台架装置中,研究了影响加氢柴油中超细固体微粒去除效率的因素。运用油液中固体颗粒物的显微镜计数法,测定了不同条件下加氢柴油中的固体微粒,比对ISO液压传动油液中固体颗粒污染等级代号,确定了精制后加氢柴油的固体微粒等级。研究结果发现,在介电陶瓷的介电常数ε<12 000的范围内,介电精制效率随介电常数的升高而升高,但当ε>12 000后精制效率降低;加氢柴油中颗粒物的去除率随分离电压的增大呈先增加后降低的变化趋势,在分离电压为4 000 V时介电精制效果最好。在ε=12 000、分离电压为4 000 V、流量为36.4 mL/min时,加氢柴油中颗粒物的去除率最大,为99.33%,精制后加氢柴油的固体微粒等级达到2级。 According to the principle of dielectrophoresis(DEP), the factors having effects on the efficiency of removing particles in hydrogenated diesel fuel by DEP process were studied. It was found that the efficiency of particles removal in hydrogenated diesel with DEP process went higher with the increase of dielectric constants of ceramics to a threshold value of 12 000. Beyond the threshold value,the efficiency decreased with further increase of dielectric constants of ceramics used in the process. The effect of separation voltage on refining efficiency was analyzed as well. Under the optimum refining conditions of a dielectric constant of 12 000, a separation voltage of 4 000 V and a flowrate of 36.4 mL/min,the particles removal rate of hydrogenated diesel was as high as 99.33%. After refining, the treated diesel could meet the 2nd class requirement of solid particles standard.
出处 《石油炼制与化工》 CAS CSCD 北大核心 2009年第7期51-54,共4页 Petroleum Processing and Petrochemicals
基金 国家自然科学基金(90305011) 中央民族大学985项目(CUN985-30-3)
关键词 介电分离 介电陶瓷 介电常数 柴油 dielectrophoresis dielectric ceramic dielectric constant diesel fuel
  • 相关文献

参考文献2

二级参考文献18

  • 1曲丹丹,武琳,王学忠,薛剑英,王卓.润滑油污染度的分级及检测[J].润滑油,2004,19(5):62-64. 被引量:9
  • 2T Schnelle. Dielectrophoretic Manipulation of Suspended Submicron Particles[ J ]. Electrophoresis, 2000,21 : 66 - 73.
  • 3Yoshikazu Wakizaka. Effect of Electrode Geometry on Dielectrophoretic Separation of Cells [ J ]. Biochemical Engineering Journal[J].2004,20:13 - 19.
  • 4Esther G Cen. A Combined Didectrophoresis Traveling Wave Dielectrophoresis and Electrorotation Microchip for the Manipulation and Characterization of Human Malignant Cells[J]. Journal of Microbiological Methods, 2004,58: 387- 401.
  • 5Yu W,J,Cho Y,S, Choi G,S, Kim D,J,Song Y, H & Lee J, H, A Stable High Power Carbon Nanotube Field-Emitter Device[J]. Diamond and Related Materials 13, 1017-1021 (2004).
  • 6Alexander T, Hatton K, Fuhrer M, S, Paranjape M and Barbara P, A Photolithographic Process for Fabrication of Devices with Isolated Single-Walled Carbon Nanotubes[J]. Nanotechnology 15, 1475-1478 (2004).
  • 7Larry A. Nagahara, Islamshah Amlani, Justin Lewenstein,and Raymond K. Tsui. Directed Placement of Suspended Carbon Nanotubes for Nanometer-Scale Assembly [J]. Applied Physics Letters,2002.5, 80(20) : 3826-3828
  • 8Huang Y, Duan X F and Wei Q Q, et al. Science[J]. 2001,291:630
  • 9Huijun Xin and Adam T. Woolley. Directional Orientation of Carbon Nanotubes on Surfaces Using a Gas Flow Cell[J].Nano Letters, 2004,4 (8) : 1481-1484
  • 10Hyunhyub Ko, Sergiy Peleshanko, and Vladimir V. Tsukruk.Combing and Bending of Carbon Nanotube Arrays with Confined Microfluidic Flow on Patterned Surfaces[J]. J. Phys.Chem. B 2004, 108:4385-4393

共引文献6

同被引文献63

引证文献7

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部