期刊文献+

基于二维混合模型和状态观测器的重复控制设计 被引量:7

Repetitive Control Design Based on Two-dimensional Hybrid Model and State Observer
在线阅读 下载PDF
导出
摘要 针对一类正则线性系统,提出一种基于状态观测器和二维混合模型的重复控制系统设计方法.首先,通过构造一个状态观测器来重构系统的状态,建立基于重构状态的线性控制律.然后,通过独立地考虑重复控制系统的连续控制过程与离散学习行为,给出基于状态观测器和重构状态反馈的连续/离散二维混合模型.针对这个混合模型,运用二维Lyapunov泛函方法,以线性矩阵不等式(Linear matrix inequality,LMI)的形式给出重复控制系统存在重复控制器和状态观测器的充分条件,所给条件可用Matlab工具箱方便地求解.数值仿真验证了本文所提方法的有效性. This paper presents a method of designing a repetitive control system for a class of regular linear systems. The method is based on a state observer and a two-dimensional (2D) hybrid model. First, a state observer is constructed to reconstruct system states and a linear control law is established based on the reconstructed states. Next, by describing the continuous control and discrete learning actions of repetitive control system independently, a continuous-discrete 2D hybrid model is established based on the state observer and the reconstructed state feedback. In the light of the 2D Lyapunov function, a sufficient condition is given in the form of linear matrix inequality (LMI) for the existence of the state observer and the repetitive controller for the repetitive control system. The condition can be resolved conveniently by using the Matlab toolbox. A numerical example is provided to demonstrate the effectiveness of the proposed controller design procedures.
出处 《自动化学报》 EI CSCD 北大核心 2009年第7期945-952,共8页 Acta Automatica Sinica
基金 国家自然科学基金(60674016) 国家杰出青年基金(60425310)资助~~
关键词 正则线性系统 二维混合模型 状态观测器 线性矩阵不等式 Regular linear systems, 2D hybrid model, state observer, linear matrix inequality (LMI)
  • 相关文献

参考文献15

  • 1Hara S,Yamamoto Y,Omata T,Nakano M.Repetitive control system:a new type servo system for periodic exogenous signals.IEEE Transactions on Automatic Control,1988,33(7):659-668
  • 2Hillerstrokm G,Walgama K.Repetitive control theory and applications-a survey.In:Proceedings of the 13th Triennial World Congress.California,USA:IFAC,1996.1-6
  • 3She J H,Pan Y,Nakano M.Repetitive control system with variable structure controller.In:Proceedings of the 6th International Workshop on Variable Structure Systems.Gold Coast,Australia:IEEE,2000.273-282
  • 4Owens D H,Li L M,Banks S P.Multi-periodic repetitive control system:a Lyapunov stability analysis for MIMO systems.International Journal of Control,2004,77(5):504-515
  • 5张立强,杨国来,龚海峰.基于重复控制补偿的电液位置伺服系统PID控制[J].机床与液压,2005,33(8):112-112. 被引量:7
  • 6Park S W,Jeong J,Yang H S,Park Y P,Park N C.Repetitive controller design for minimum track misregistration in hard disk &ires.IEEE Transactions on Magnetics,2005,41(9):2522-2528
  • 7Chen J W,Liu T S.H∞ repetitive control for pickup head flying height in near-field optical disk drives.IEEE Transactions on Magnetics,2005,41(2):1067-1069
  • 8吴敏,兰永红,佘锦华.基于二维混合模型的重复控制系统设计新方法[J].自动化学报,2008,34(9):1208-1214. 被引量:14
  • 9Du C L,Xie L H.H∞ Control and Filtering of TwoDimensional Systems.Berlin:Springer-Verlag,2002.5-25
  • 10李阳,朱家仪,李树民.正则线性系统的闭环P型迭代学习控制[J].战术导弹技术,2004(6):48-51. 被引量:2

二级参考文献32

  • 1王春行.液压伺服控制系统(第2版)[M].机械工业出版社,1993..
  • 2雷天觉.液压工程手册[M].北京:机械工业出版社,1999..
  • 3Uchiyama M.Formation of High-speed Motion Pattern of a Mechanical Arm by Trial [J].Transactions of the Society of Instrumentation and Control Engineers,1978,14(6):706~712.
  • 4Arimoto S,Kawamura S,Miyazaki F.Bettering Operation of Robots by Learning[J].Journal of Robotic Systems,1984,1(2):123~140
  • 5Arimoto S,Kawamura S,Mayazaki F.Bettering Operation of Dynamic Systems by Learning:A New Control Theory for Servomechanism Systems[C].Proceedings of the 23rd IEEE Conference on Decision and Control,Las Vegas,Nevada,1984:1064~1069.
  • 6TOMMY W S C, FANG Y. An iterative learning control method for continuous-time systems based on 2-D systems theory[J]. IEEE Trans on Cir and Sys Ⅰ, 1998, 45(6):683.
  • 7HillerstrAokm G, Walgama K. Repetitive control theory and applications - a survey. In: Proceedings of the 13th IFAC Triennial World Congress. California, USA: IFAC, 1996.1-6.
  • 8Kim B S, Li J W, Tsao T C. Two-parameter robust repetitive control with application to a novel dual-stage actuator for noncircular machining. IEEE Transactions on Mechatronics, 2004, 9(4): 664-652.
  • 9Yamada M, Riadh Z, Funahashi Y. Design of discrete-time repetitive control system for pole placement and application. IEEE Transactions on Mechatronlcs, 1999, 4(2): 110-118.
  • 10She J H, Pan Y, Nakano M. Repetitive control system with variable structure controller. In: Proceedings of the 6th International Workshop on Variable Structure Systems. Gold Coast, Australia: World Scientific, 2000. 273-282.

共引文献24

同被引文献82

引证文献7

二级引证文献16

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部