期刊文献+

Precipitates in Steels With Ti Additive Produced by CSP Process 被引量:4

Precipitates in Steels With Ti Additive Produced by CSP Process
原文传递
导出
摘要 Hot strips of low carbon steels with Ti additive [-contain C 0.04 % -0. 07 % , Si≤0.6%, Mn≤0.6%, Ti 0. 060/00- 0.14% (mass percent)] prodvced by EAF-CSP (Electric Arc Furnaces-Compact Strip Production) process were examined by TEM, HREM and XRD. Carbonitrides with different N/C ratio were found in the sam- ples. The varying composition of the Ti-carbonitrides resulted from the supersaturation of Ti and temperature at which the compound was formed. In the tested steel, total mass fraction of the precipitates including cementite, carbonitride and a small quantity of Fe3O4, AO2O3 , Ti2 CS and A1N was about 0. 305 %. XRD results showed that about a quarter of the powder extracted by electrolysis was titanium nitrides, carbonitrides and carbides. Particle arrays formed by interphase precipitation could be observed either in slabs or in hot strips. The dominant reaction mecha- nisms were discussed. Compared with the conventional cold charge process, small amount of Ti addition would be more effective for orecipitation of fine orecioitates in the steels oroduced by CSP process. Hot strips of low carbon steels with Ti additive [-contain C 0.04 % -0. 07 % , Si≤0.6%, Mn≤0.6%, Ti 0. 060/00- 0.14% (mass percent)] prodvced by EAF-CSP (Electric Arc Furnaces-Compact Strip Production) process were examined by TEM, HREM and XRD. Carbonitrides with different N/C ratio were found in the sam- ples. The varying composition of the Ti-carbonitrides resulted from the supersaturation of Ti and temperature at which the compound was formed. In the tested steel, total mass fraction of the precipitates including cementite, carbonitride and a small quantity of Fe3O4, AO2O3 , Ti2 CS and A1N was about 0. 305 %. XRD results showed that about a quarter of the powder extracted by electrolysis was titanium nitrides, carbonitrides and carbides. Particle arrays formed by interphase precipitation could be observed either in slabs or in hot strips. The dominant reaction mecha- nisms were discussed. Compared with the conventional cold charge process, small amount of Ti addition would be more effective for orecipitation of fine orecioitates in the steels oroduced by CSP process.
出处 《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2009年第4期60-66,共7页
基金 Item Sponsored by National Natural Science Foundation of China (50371009)
关键词 compact strip production steel with Ti additive titanium carbonitride precipitation interphase precipitation compact strip production steel with Ti additive titanium carbonitride precipitation interphase precipitation
  • 相关文献

参考文献1

二级参考文献2

  • 1雍岐龙 马鸣图 吴宝榕.微合金钢-物理和力学冶金[M].北京:机械工业出版社,1989..
  • 2Kunishige K. Strengthening and Toughening of Hot-direcectrolled Steels by Addition of A Small Amount of Titanium[J].ISIJ International, 1989,29: 940.

共引文献26

同被引文献21

引证文献4

二级引证文献25

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部