期刊文献+

Oxidation behavior of in-situ Al_2O_3/TiAl composites at 900°C in static air 被引量:2

Oxidation behavior of in-situ Al_2O_3/TiAl composites at 900°C in static air
在线阅读 下载PDF
导出
摘要 In-situ Al2O3/TiAl composites were successfully synthesized from the starting powders of Ti, Al, TiO2 and Nb2O5. The oxidation behavior of the composites at 900℃ in static air was investigated. The results indicate that the composite samples present a much lower oxidation mass gain. Under long-time intensive oxidation exposure, the formed oxide scale is multi-layer. The formation of the outer TiO2 layer is fine and dense, the internal Al2O3 scale has good adhesiveness with the outer TiO2 scale, and the TiO2+Al2O3 mixed layer forming the protective oxide scale is favorable for the improvement of oxidation resistance. It is believed that the incorporation of Al2O3 particulates into the metal matrix decreases the coefficient of thermal expansion of the substrate, and forms a local three-dimensional network structure that can hold the oxide scale. The formation of the oxide scale with finer particle size, stronger adherence, less micro-defects and slower growth rate can contribute to the improvement of oxidation resistance. Nb element plays an important role in reducing the internal oxidation action of the materials, restraining the growth of TiO2 crystals and promoting the stable formation of the Al2O3-riched layer, which is beneficial to improve the oxidation properties. In-situ Al2O3/TiAl composites were successfully synthesized from the starting powders of Ti, Al, TiO2 and Nb2O5. The oxidation behavior of the composites at 900℃ in static air was investigated. The results indicate that the composite samples present a much lower oxidation mass gain. Under long-time intensive oxidation exposure, the formed oxide scale is multi-layer. The formation of the outer TiO2 layer is fine and dense, the internal Al2O3 scale has good adhesiveness with the outer TiO2 scale, and the TiO2+Al2O3 mixed layer forming the protective oxide scale is favorable for the improvement of oxidation resistance. It is believed that the incorporation of Al2O3 particulates into the metal matrix decreases the coefficient of thermal expansion of the substrate, and forms a local three-dimensional network structure that can hold the oxide scale. The formation of the oxide scale with finer particle size, stronger adherence, less micro-defects and slower growth rate can contribute to the improvement of oxidation resistance. Nb element plays an important role in reducing the internal oxidation action of the materials, restraining the growth of TiO2 crystals and promoting the stable formation of the Al2O3-riched layer, which is beneficial to improve the oxidation properties.
出处 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2009年第3期339-344,共6页 矿物冶金与材料学报(英文版)
基金 supported by the Special Program of the Education Bureau of Shaanxi Province of China (No.08JK240) the Breeding Program for Provincial Level Key Research Base of Shaanxi University of Technology (No.SLGJD0806)
关键词 intermetallic matrix composites ALUMINA oxidation resistance scale spallation high temperature intermetallic matrix composites alumina oxidation resistance scale spallation high temperature
  • 相关文献

参考文献4

二级参考文献36

  • 1Kim Y.W.,Intermetallics alloys based on gamma titanium aluminide,JOM,1989,41 (7):24.
  • 2Kim Y.W.and Dimiduk D.M.,Progress in the understanding of gamma titanium aluminide,JOM,1991,43 (8):40.
  • 3Beddoes J.C.,Wallace W.,and de Malherbe M.C.,Technology for titanium aluminides for aerospace applications.Mater.Manuf.Proc.,1992,7:527.
  • 4Kim Y.W.,Gamma titanium aluminide:their status and future,JOM,1995,47 (7):39.
  • 5Hodge A.M.,Hsiung L.M.and Nieh T.G.,Creep of nearly lamellar TiAl alloy containing W,Scripta Mater.,2004,51 (5):411.
  • 6Yoshihara M.and Kim Y.W.,Oxidation behavior of gamma alloys designed for high temperature applications,Intermetallics,2005,13 (9):952.
  • 7Huang S.C.and Hall E.L.,On the temperature dependence of yield stress in TiAl base alloys,Scripta Metall.Mater.,1991,25 (8):1805.
  • 8Mitao S.,Tsuyama S.,and Minakawa K.,Effects of microstructure on the mechanical properties and fracture of γ-base titanium aluminides,Mater.Sci.Eng.A,1991,143:51.
  • 9Gnanamoorthy R.,Mutoh Y.,Masahashi N.,and Mizuhara Y.,Fracture toughness of gamma-base titanium aluminides,Metall.Mater.Trans.A,1995,26:305.
  • 10Nobuki M.,Vanderschueren D.,and Nakamura M.,High temperature mechanical properties of vanadium alloyed γ base titanium-aluminides,Acta Metall.Mater.,1994,42:2623.

共引文献29

同被引文献6

引证文献2

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部