期刊文献+

环境因子对木塑地板疲劳/蠕变性能的影响 被引量:6

Effect of Environmental Factors on Fatigue and Creep Behaviors of Wood-Plastic Flooring
在线阅读 下载PDF
导出
摘要 选取25%和75%两种应力水平,对放置在室内、阳光照射、户外自然环境和土壤中的木塑地板,进行疲劳/蠕变性能研究。结果表明:相同的加载方式,户外自然环境对材料疲劳/蠕变性能影响最大,其次是阳光照射,最后是土壤;25%应力水平作用后,室内环境中材料的剩余强度保留率最大,其次是土壤掩埋,最后是户外自然和阳光环境。 Under 25% or 75% stress levels, wood-plastic floorings were evaluated for their creep and fatigue behavior after being subjected for two months to four different conditions (room temperature, sunshine, outdoor natural (dry and wet), and soil isolated from oxygen). It was found that the environmental conditions had considerable effect on the fatigue and creep behaviors of the specimens. Under the same stress level, conditioning at the outdoors natural location had the greatest effect on both fatigue and creep performance of the specimens while the room condition exhibited the least impact. Testing at the 25% stress level gave the following results: the average residual flexural strength of the specimens conditioned at room temperature was 94.2%-97.3% of the bending strength of the control specimens, 93. 1%-95.1% when conditioned in the soil, and 71.9%%84.5%when conditioned in the outdoors natural and sunshine locations.
出处 《木材工业》 北大核心 2009年第4期9-11,共3页 China Wood Industry
基金 国家自然科学基金项目(30871968) 国家自然科学基金项目(30771683) 江苏省科技成果转化专项资金项目(20079663-T-432)
关键词 木塑地板 环境 抗弯强度 蠕变 疲劳 wood-plastic flooring environment modulus of rupture creep fatigue
  • 相关文献

参考文献4

二级参考文献20

  • 1李志君,李学成.高性能复合材料弯曲疲劳性能研究[J].高科技纤维与应用,2004,29(5):11-14. 被引量:7
  • 2林建国,浦鸿汀.木塑复合材料的研究和应用进展[J].广东塑料,2006(3):17-20. 被引量:19
  • 3深掘美英.-[J].日本橡胶协会志(日),1985,58(10):625-625.
  • 4张士齐.-[J].橡胶工业,1988,35(10):616-616.
  • 5张士齐,橡胶工业,1988年,35卷,10期,616页
  • 6Mannan S L, Valsan M. Int J Mech Sci, 2006, 48 (2) : 160
  • 7Lagneborg R, Attermo R.Metall Trans, 1971, 2 (7): 1821
  • 8Batte A D. Fatigue at High Temperatue. Skelton R P. New York:Applied Science Publishers, 1983. 365
  • 9Samir A, Simon A, Scholz A, et al. Int J Fatigue, 2006, 28(5) : 643
  • 10全国塑料制品标准化技术委员会.GB/T8814-2004门、窗用未增塑聚氯乙烯(PVC-U)型材[S].北京:中国标准出版社,2004.

共引文献28

同被引文献59

  • 1刘青春,何霞.产品仿生设计探究[J].包装工程,2006,27(2):194-196. 被引量:50
  • 2涂芳,孙可伟,李如燕.甘蔗渣/LDPE发泡木塑复合材料的研究[J].塑料工业,2007,35(5):16-19. 被引量:20
  • 3左铁峰.产品形态建构分析[J].包装工程,2007,28(8):174-176. 被引量:7
  • 4虞华强,赵荣军,刘杏娥,费本华.木材蠕变模拟研究概述[J].林业科学,2007,43(7):101-105. 被引量:22
  • 5Jiang L,Wolcott M P,Zhang J,et al.Flexural properties of surface reinforced wood/plastic deck board[J].Polymer Engineering and Science,2007,47(3):281-283.
  • 6Najafi S K,Sharifnia H,Tajvidi M.Effects of water absorption on creep behavior of wood-plastic composites[J].Journal of Composite Materials,2008,42(10):993-1002.
  • 7Ndiaye D,Fanton E,Morlat-Therias S,et al.Durability of wood polymer composites:Part 1-influence of wood on the photochemical properties[J].Composites Science and Technology,2008,68(13):2779-2784.
  • 8Stark N M.Effect of weathering cycle and manufacturing method on performance of wood flour and high-density polyethylene composites[J].Journal of Applied Polymer Science,2006,100(4):3131-3140.
  • 9Park S W,Schapery R A.Methods of interconversion between 1inear viscoelastic material functions:Part 1-a numerical method based on Prony series[J].Int J Solids & Structures,1999,36(11):1653-1675.
  • 10Stark N M.Photo degradation and photo stabilization of weathered wood flour filled polyethylene composites[D].Hougton:Michigan Technological University,2003.

引证文献6

二级引证文献37

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部