期刊文献+

焊接工字形截面抛物线拱平面内稳定性试验研究 被引量:7

Experimental study on in-plane stability of welded I-section steel parabolic arches
原文传递
导出
摘要 进行了全跨竖向均布荷载和半跨竖向均布荷载作用下焊接工字形截面两铰抛物线钢拱平面内稳定承载力试验研究。通过试验揭示了抛物线钢拱平面内的失稳破坏机理,全跨竖向均布荷载作用下抛物线钢拱发生不完全反对称的平面内失稳破坏,半跨竖向均布荷载作用下抛物线钢拱发生反对称的平面内失稳破坏;半跨竖向均布荷载作用下抛物线钢拱的稳定承载能力低于全跨竖向均布荷载作用下的稳定承载能力;试验结果与有限元法分析结果进行了对比,二者吻合良好,有限元法研究钢拱的平面内稳定具有很高的精度;试验结果验证了工字形截面抛物线钢拱平面内稳定性设计方法安全可靠,可供设计使用。 The in-plane inelastic stability load-carrying capacity of welded I-section two-hinged steel parabolic arches with rise-to-span ratio of 0. 3 and 0. 2 under both full and half span vertical load uniformly distributed on a horizontal projection respectively is investigated experimentally. Experimental results obtained illustrate that steel parabolic arches under the full span uniformly distributed load buckles non-symmetrically, and that steel parabolic arches under the half span uniformly distributed load buckles anti-symmetrically. It is verified that the arch under the half span load reaches its limit state at a lower load than that of the arch under the full span load. Comparison shows that the ultimate loads predicted by the numerical analysis are well close to those obtained by the experiment. Numerical analyses are accurate enough to investigate the in-plane stability behavior and to predict the ultimate load-carrying capacity of steel parabolic arches. This indicates the numerical research on the arch stability behavior can obtain more valuable theoretical results to direct practical stability design of steel arches.
出处 《建筑结构学报》 EI CAS CSCD 北大核心 2009年第3期95-102,共8页 Journal of Building Structures
基金 国家自然科学基金资助项目(50478013)
关键词 两铰抛物线拱 静力试验 平面内稳定 承载力 two-hinged parabolic arch static test in-plane stability load-carrying capacity
  • 相关文献

参考文献6

  • 1GB50017-2003.钢结构设计规范[S].[S].,..
  • 2Pi Yong-Lin, Trahair N S. In-plane inelastic buckling and strengths of steel arches [J]. Journal of Structural Engineering, ASCE, 1996,122 (7): 734-747.
  • 3Pi Yong-Lin, Bradford Mark A. In-plane strength and design of fixed steel I-section arches [J]. Engineering Structures, 2004,26 ( 3 ): 291-301.
  • 4Lin Bing, Guo Yanlin. In-plane ultimate strength of I-section three-hinged steel circular arches subjected to hydrostatic pressure [C]// Pacific Structural Steel Conference 2007. Wairakei, New Zealand: Steel Structures in Natural Hazards, 2007.
  • 5林冰,郭彦林.纯压抛物线拱平面内稳定性及设计方法研究[J].建筑结构学报,2009,30(3):103-111. 被引量:15
  • 6DIN 18800-1992 German buckling specifications[S].

二级参考文献8

  • 1DIN 18800-1992 German buckling specifications[S].
  • 2Lin Bing, Gno Yanlin. In-plane ultimate strength of I-section three-hinged steel circular arches subjected to hydrostatic pressure [C]// Pacific Structural Steel Conference 2007. New Zealand: Steel Structures in Natural Hazards, Wairakei, 2007.
  • 3Pi Yong-lin, Trahair N S. In-plane inelastic buckling and strengths of steel arches [ J ]. Journal of Structural Engineering, ASCE, 1996,122 (7) : 734-747.
  • 4Pi Yong-lin, Bradford Mark A. In-plane strength and design of fixed steel I-section arches [ J ]. Engineering Structures, 2004, 26(3) : 291-301.
  • 5陈惠发.钢框架稳定设计[M].周绥平译.上海:世界图书出版公司,1999.
  • 6GB50017-2003.钢结构设计规范[S].[S].,..
  • 7钢结构设计规范编制组.钢结构设计规范应用讲解[M].北京:中国计划出版社,2003.138-142.
  • 8郭彦林,林冰,郭宇飞.焊接工字形截面抛物线拱平面内稳定性试验研究[J].建筑结构学报,2009,30(3):95-102. 被引量:7

共引文献2069

同被引文献93

引证文献7

二级引证文献56

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部