期刊文献+

DD6单晶高温合金扭转小角度晶界的拉伸性能 被引量:5

Tensile Properties of Twist Low Angle Boundary of DD6 Single Crystal Superalloy
在线阅读 下载PDF
导出
摘要 在760℃,850℃和980℃温度条件下,研究了DD6单晶高温合金扭转小角度晶界的横向拉伸性能和断裂特征。结果表明,相同晶界角度的试样,随着温度的升高,DD6单晶高温合金拉伸强度降低。在760℃,850℃和980℃三个温度下,晶界角度分别为10.8,°6.4,°3.8°时,试样出现沿晶断裂,小角度晶界试样的拉伸强度降低。小角度晶界试样沿晶断裂明显降低试样的拉伸塑性。 The transverse tensile properties and fracture behaviour of the twist low angle boundary of DD6 single crystal superalloy were investigated at 760℃ , 850℃ and 980℃. The transverse tensile strength of the specimens with the same twist LAB decreases with the increasing of temperature. When the LAB of the specimen is 10.8° at 760℃ , 6.4° at 850℃ and 3.8° at 980℃ respectively, intergranular rupture can be observed and the tensile strength decreases. The intergranular rupture mode makes the tensile plastic of the specimen decrease.
出处 《航空材料学报》 EI CAS CSCD 北大核心 2009年第3期88-92,共5页 Journal of Aeronautical Materials
关键词 DD6 单晶高温合金 小角度晶界 拉伸性能 DD6 single crystal superalloy low angle boundary tensile properties
  • 相关文献

参考文献12

  • 1POLLOCK T M,MURPHY W H,GOLDMAN E H,et al.Grain defect formation during directional solidification of nickel base single crystals[A].ANTOLOVICH S D,STUSRUD R W,MACKAY R A,et al.Superalloys 1992[C].Pennsylvania:TMS,1992:125-134.
  • 2DRAGNEVSKI K,MULLIS A M,WALKER D J,et al.Mechanical deformation of dendrites by fluid flow during the solidification of undercooled melts[J].Acta Mater,2002,50:3743-3755.
  • 3NEWELL M,DEVENDRA K,JENNINGS P A,et al.Role of dendrite branching and growth kinetics in the formation of low angle boundaries in Ni-base superalloys[J].Materials Science and Engineering A,2005,413-414:567-570.
  • 4ROSS E W,O′HARA K S.Ren?N4:first generation single crystal turbine airfoil alloy with improved oxidation resistance,low angle boundary strength and superior time rupture strength[A].KISSINGER R D,DEYE D J,ANTON D L,et al.Supperalloys 1996[C].Warrendale:TMS,1996:19-25.
  • 5SHAH D M,CETEL A.Evaluation of PWA1483 for large single crystal IGT blade applications[A].POLLOCK T M,KISSINGER R D,BOWMAN R R,et al.Superalloys 2000[C].Warrendale:TMS,2000:295-304.
  • 6赵金乾.小角度晶界对单晶高温合金DD6力学性能的影响[D].北京:北京航空材料研究院,2007.
  • 7LI J R,ZHAO J Q,LIU S Z,et al.Effects of low angle boundaries on the mechanical properties of single crystal superalloy DD6[A].REED R C,GREEN K A,CARON P,et al.Superalloys 2008[C].Pennysylvania:TMS,2008:443-451.
  • 8UEDA M,YASUDA H,UMAKOSHI Y.Effect of grain boundary character on the martensitic transformation in Fe-32at.% Ni Bicrystals[J].Acta Mater,2001,49:3421-3432.
  • 9李嘉荣,刘世忠,王开国,李骋,钟振纲.第二代单晶高温合金DD6的拉伸性能[J].钢铁研究学报,2003,15(z1):272-275. 被引量:16
  • 10MARCHINONNI M,GOLDSCHMIDT D,MAKDINI M.High temperature mechanical properties of CMSX-4+Yttrium single crystal nickel-base superalloy[A].ANTOLOICH S D,STUSRUD R W,MACKAY R A,et al,Superalloys 1992[C].Warrendale:TMS,1992:775-784.

二级参考文献16

共引文献42

同被引文献18

引证文献5

二级引证文献37

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部