摘要
设计了一种水平面赋形、俯仰面扫描的一维相控阵天线,天线单元采用印刷振子.为了获得低副瓣,馈电电流采用泰勒分布.为了满足0.2°扫描步进指标要求,采用虚位技术,通过4位移相器实现9位移相器功能,简化了设备,降低了成本.测试表明:在±15°扫描范围内,半功率波束宽度小于2.3°,增益大于25 dB,副瓣低于-25 dB,水平赋形方向图3 dB波束宽度33°,满足设计指标要求.
A phased array antenna, which scans in the elevation plane with the shaped pattern in the azimuth plane, is analyzed and designed. The printed dipole is used as radiating elements. The fed current distribution in the scan plane adopts the Taylor amplitude illumination function in order to obtain a low sidelobe lever. The technology of virtual displacement with 4 bit digital phase shifters instead of 9 bit is used to satisfy the smallest steering increment of 0.2°, which simplifies facilities and lowers the cost. It is proved by reliable tests that within the scanning range of ±15°, the half power heamwidth is less than 2.3°, that the gain is higher than 25dB, that the sidelobe lever is lower than -25dB, and that the shaped beam width is 33°, which perfectly satisfs the requirements.
出处
《西安电子科技大学学报》
EI
CAS
CSCD
北大核心
2008年第6期1084-1088,共5页
Journal of Xidian University
基金
国家自然科学基金资助(6071001)
陕西省自然科学基础研究资助(2005F21)
西安市火炬攻关资助(GG06020)
关键词
相控阵天线
印刷振子
波束赋形
泰勒分布
虚位技术
phased array antennas
printed dipole
shaped pattern
Taylor amplitude illumination function
the technology of virtual displacement
