摘要
采用化学镀工艺在玻璃纤维表面包覆一层Ni-P合金涂层,用扫描电子显微镜、X射线能谱仪、X射线衍射仪、热震实验对涂层的形貌、组成、结构和性能进行了表征。结果表明,玻璃纤维表面化学镀Ni-P合金涂层由直径为0.1-1μm的颗粒所组成,涂层厚度约为1-1.5μm。涂层与玻璃纤维之间的结合力好,电阻率达到1.25×10-3Ω.cm。化学镀玻璃纤维具有较好的导电性,可作为制备导电高分子材料的填料。
The Ni-P alloy coating was covered on surface of glass fiber by electroless plating technology. Morphology, composition, structure and property of the Ni-P plating were characterized by scanning electron microscopy （SEM）, energy diffraction spectrum （EDS）, X-ray diffraction （XRD） and thermal shock test, respec tively. The results showed that the Ni-P alloy coating on surface of glass fiber, which was 1-1.5μm or so in depth, was composed of 0.1-1μm grains. There was good adhesion between Ni-P plating and glass fiber. The resistivity of the plated glass fiber was 1.25×10^-3Ω·cm, so it could be used as conductive filling for the preparation of conductive polymers.
出处
《功能材料》
EI
CAS
CSCD
北大核心
2008年第7期1128-1130,共3页
Journal of Functional Materials
基金
国家自然科学基金资助项目(10647143)
西南科技大学引进人才基金资助课题(053117)
关键词
玻璃纤维
化学镀
Ni-P涂层
导电性
表征
glass fiber
electroless plating
Ni-P plating
conductivity
characterization
