期刊文献+

壁面展向匀速运动的槽道湍流的直接数值模拟 被引量:2

Direct numerical simulations of turbulent channel flows with spanwise moving wall
在线阅读 下载PDF
导出
摘要 为了解展向存在匀速流动时湍流槽道流动的特性,应用直接数值模拟方法研究了壁面的展向运动对湍流槽道流动的影响.采用标准谱方法对固定质量流率条件下,上壁面展向运动速度分别等于零、流向流量平均速度以及两倍于流向流量平均速度等3种情况进行了直接数值模拟.结果表明,壁面的展向运动会导致表面摩擦力的增大,二阶湍流统计量诸如均方根速度脉动、雷诺剪切应力和均方根涡量脉动等都会随着壁面展向运动速度的增大而显著增长,同时,槽道截面上的均方根速度脉动也变得更均匀. The influence of spanwise moving wall on turbulent channel flows is investigated using direct numerical simulations (DNS) , which in order to know the characteristics of turbulent channel flows when existing spanwise moving velocity. The DNS is performed using the standard spectral method. Three cases with the spanwise wall moving velocity which equals 0, bulk flow velocity and double bulk flow velocity are simulated at constant mass flow rate. The results show that spanwise moving wall induce the skin friction increasing. The second-order turbulence statistics such as root-mean-square velocity fluctuations, Reynolds shear stress and root-mean-square vortieity fluctuations are substantial increase with spanwise velocity increasing. It is also observed that the root-mean-square velocity fluctuations become more even across the channel with spanwise velocity increasing.
出处 《北京航空航天大学学报》 EI CAS CSCD 北大核心 2008年第8期944-947,共4页 Journal of Beijing University of Aeronautics and Astronautics
基金 国家自然科学基金资助项目(10272105 10602006)
关键词 槽道湍流 直接数值模拟 壁面展向运动 channel turbulence direct numerical simulations spanwise moving wall
  • 相关文献

参考文献9

  • 1Orszag S A, Patterson G S. Numerical simulation of three-dimensional homogeneous isotropic turbulence [ J ]. Phys Review Lett, 1972, 28 : 76-79
  • 2Moin P, Mahesh K. Direct numerical simulation: a tool in turbulence research[J]. Annu Rev Fluid Mech, 1998 , 30 : 535 - 578
  • 3Kim J, Moin P, Moser R. Turbulence statistics in fully developed channel flow at low Reynolds number[ J]. J Fluid Mech, 1987, 177 : 133-166
  • 4Zhaoshun Zhang,Bing Ma,Guixiang Cui,Chunxiao Xu.Flow patterns and dissipation of turbulent kinetic energy in near-wall turbulence[J].Chinese Science Bulletin,1998,43(2):117-120. 被引量:2
  • 5He Guowei, Zhang Jinbai. Elliptic model for space-time correlations in turbulent shear flows[ J]. Physical Review E, 2006,73 (5) : 055303
  • 6Zhang Zhaoshun, Cuil Guixiang, Shao Liang. New subgrid model for large eddy simulation[ C]//Zhuang Fenggan, Li Jiachun. Recent Advances in Fluid Mechanics. Beijing : Tsing Hua University Press, 2004 : 22 -28
  • 7Leveque E, Toschi F, Shao Liang, et al. Shear-improved smagorinsky model for large-eddy simulation of wall-bounded turbulent flows[J]. J Fluid Mech, 2007, 570 : 491 -502
  • 8舒桃,陆夕云,杨国伟,庄礼贤.无限翼展后掠翼大迎角绕流和涡控制的数值模拟[J].空气动力学学报,2000,18(3):264-271. 被引量:2
  • 9Karniadakls G E, Israeli M, Orszag S A. High-Order splitting methods for the imcompressible Navier-Stoekes equations[J]. J Corn Phys, 1991, 97 : 414 -443

二级参考文献6

  • 1Yang G W,Acta Mech Sin,1999年,15卷,116125页
  • 2Gadel Hak M,AIAA J,1998年,23卷,11期,1660页
  • 3Wu J Z,J Fluid Mech,1998年,371期,2158页
  • 4Yang G W,Acta Mech Sin,1997年,13卷,4期,304页
  • 5Wu J M,AIAA paper 97-2063,1997年
  • 6Wu J Z,AIAA paper 97-2064,1997年

共引文献2

同被引文献9

  • 1方慧,郭培基,余景池.液体喷射抛光时各工艺参数对材料去除量的影响[J].光学技术,2004,30(4):440-442. 被引量:11
  • 2Ghobeity A, Ciampini D, Papini M. An Analytical Model of the Effect of Particle Size Distribution on the Surface Profile Evo- lution in Abrasive Jet Micromachining[J]. Journal of Microme- chanics and Microen~ineerin~. 2009. 209(20~: 6067-6077.
  • 3李琛.基于“软性”液一固两相磨粒流的磨具结构化表面光整加工的工艺研究[D].杭州:浙江工业大学,2010.
  • 4Ohashi K,Wang R,Hasegawa H Fundamental Study on the Pre- cision Abrasive Machining Using a Cavitation in Revering Suc- tion Flow[J].Aavances in Abrasive Te-chnology XI,2009,389 (1):223-228.
  • 5D. S. Miller. Micromachining with Abrasive Waterjets[J]. Jour- nal of Material Processing Technology,20(M,149(3): 37-42.
  • 6Ji Shiming, Jin Mingsheng, Li Zhang et al. Design of Spinning- inflated-gasbag Polishing Tool and Its Automated System for Free-form Mould [J]. WSEAS Transactions on Systems, 2006, 5(23): 277-283.
  • 7Sankar MR,Jain VK.Rotational Abrasive Flow Finishing (R- AFF) Process and Its Effects on Finished Surface Topograghy [J].Internation Journal of Maching Tools &Manufacture,2010, 50(7):650-654.
  • 8唐学林,唐宏芬,吴玉林.水轮机转轮内固液两相紊流场数值模拟及磨蚀预估[J].工程热物理学报,2001,22(1):51-54. 被引量:14
  • 9傅慧萍,李杰,于彤彤,王传合,刘双双,王菁菁,韩苏,孙兆青,孙志军.微气泡减阻的数值模拟方法及尺寸效应[J].上海交通大学学报,2016,50(2):278-282. 被引量:15

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部