期刊文献+

水射流土层扩孔技术及影响因素 被引量:6

Water jet soil reaming technology and its influencing factors
原文传递
导出
摘要 分析了水射流土层扩孔参数,建立了射流参数与土体参数的关系.通过实验,研究了射流参数和钻杆运动参数对扩孔效果的影响.结果表明:提高扩孔效果必须增大射流功率,在射流作用力大于土体临界破坏力的条件下,增大射流流量比增大射流压力更加有效;合理地匹配钻杆运动参数更有利于扩孔效果的提高.工程应用证明,运用水射流扩孔技术制作多环扩孔型锚杆是可行的,锚杆承载力明显提高. Water jet soil reaming parameters were analyzed based on the water jet theory and the soil mechanical theory. Some re- lationships between water-et parameters and soil parameters were established. The effects of water jet parameters and drill motion parameters on the soil reaming were investigated by an indoor test. The experimental results show that it is necessary to increase water jet power for enhancing the soil reaming effect. Increasing the water jet flow quantity has more obvious effect on the reaming than increasing the water jet pressure while the water jet impact force exceeds the soil critical breaking force. Reasonable matching the rotation speed and vertical speed of the drill pipe has more favorable effect on the soil reaming. It is feasible through engineering application that the water jet soil reaming technology is applied to making multi-ring type anchors in engineering, and the bearing capacity of the anchors is significantly improved.
出处 《北京科技大学学报》 EI CAS CSCD 北大核心 2008年第6期585-589,共5页 Journal of University of Science and Technology Beijing
基金 新世纪优秀人才支持计划资助项目(No.NCET-07-0068)
关键词 土层 扩孔 水射流 影响因素 射流参数 锚杆 soil reaming water jet influencing factor water jet parameters anchor
  • 相关文献

参考文献9

二级参考文献12

  • 1[日]梁田胜夫 郭楚文(译) 等.淹没角形喷嘴水射流空穴特性[J].高压水射流,1987,(1):23-28.
  • 2[美]F M怀特 魏中磊等(译).粘性流体力学[M].北京:机械工业出版社,1982..
  • 3胡寿根.大侧斜螺旋桨计算设计及强度:[博士学位论文].上海:上海交通大学,1987..
  • 4蒋yu澄.水下射流冲蚀性能及喷嘴特性分析:[硕士学位论文].上海:上海理工大学,1999..
  • 5孙东玲.突出煤层定向长钻孔预抽本煤层瓦斯的研究[M].重庆:煤炭科学研究总院重庆分院,1998..
  • 6程良奎 范景伦 韩军 许建平.岩土锚固[M].北京:中国建筑工业出版社,2002..
  • 7章梓雄 董曾南.粘性流体力学[M].北京:清华大学出版社,1999.422-443.
  • 8胡寿根,朱美洲,蒋 澄.淹没水射流冲蚀性能试验研究[J].机械工程学报,1997,33(3):44-48. 被引量:21
  • 9李范山,杜嘉鸿,施小博,郭文生,王杰.射流破土机理研究及其工程应用[J].流体机械,1997,25(2):26-29. 被引量:16
  • 10胡寿根,丁胜,蒋彧澄.水下切割环境的实现及射流冲蚀性能试验研究[J].机械工程学报,1999,35(3):63-66. 被引量:3

共引文献78

同被引文献49

引证文献6

二级引证文献39

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部