期刊文献+

隔膜对18650型锂离子电池性能的影响 被引量:8

Effects of separators on the performance of 18650 type Li-ion battery
在线阅读 下载PDF
导出
摘要 用4种隔膜制作了18650型锂离子电池,并测试了电池的安全性能(150℃热箱、冲击和过充实验)和电性能(倍率和循环性能)。隔膜的孔隙率大、熔融温度高,电池的150℃热箱安全性能坚持时间就短,而2C、12 V过充安全性能和倍率放电性能更好。孔隙率值合适(约45%)和孔径均匀的隔膜,能提高电池的循环性能。 18650 type Li-ion batteries were prepared by four kinds of separators. The safety performance (150 ℃ hot oven, shock and overcharge tests) and the electrical performance (rate and cycle performance) of the batteries were tested. Separators with large porosity and high melt temperature resulted in short maintaining time for batteries of 150 ℃ hot oven safety performance,but the safety performance of 2 C, 12 V overcharge and rate discharge performance were better. Separators with suitable porosity value (about 45%) and uniformity pore size could improve the cycle performance of 18650 Li-ion batteries.
出处 《电池》 CAS CSCD 北大核心 2008年第3期166-168,共3页 Battery Bimonthly
关键词 隔膜 18650型锂离子电池 安全性能 电性能 separator 18650 type Li-ion battery safety performance electrical performance
  • 相关文献

参考文献8

  • 1Zhang S S. A review on the separators of liquid electrolyte Li-ion batteries[J]. J Power Sources,2007,164( 1 ) :351 - 364.
  • 2Tarascon J M, Gozdz A S, Warren P C. Performance of Bellcore' s plastic rechargeable lithium ion batteries[ J] . Solid State Ionics, 1996,86 - 88:49 - 54.
  • 3Djian D, Alloin F, Martinet S, et al. Lithium-ion batteries with high charge rate capacity: influence of the porous separator[J]. J Power Sources,2007,172( 1 ) : 416 - 421.
  • 4Venugopal G, Moore J, Howard J, et al. Characterization of micro porous separators for lithium ion batteries[J]. J Power Sources, 1999,77(1): 34-41.
  • 5伊廷锋,胡信国,高昆.锂离子电池隔膜的研究和发展现状[J].电池,2005,35(6):468-470. 被引量:26
  • 6Lundquist J T, Lundsager C B, Palmer N I. Battery separator[ P]. US: 4731304,1988-03- 15.
  • 7Abraham K M. Directions in secondary lithium battery research and development [ J]. Electrechim Acta, 1993,38 (9) : 1233 - 1248.
  • 8WU Yu—ping(吴宇平),WAN Chun-rong(万春荣),JIAN Chang-yin(姜长印).锂离子二次电池[M].Beljing(北京):Chemical Industry Press(化学工业出版社),2002.

二级参考文献27

  • 1WUYu-ping(吴宇平) WANChun-rong(万春荣) JIANGChangyin(姜长印)etal.锂离子二次电池[M].Beijing(北京):Chemical Industry Press(化学工业出版,2002.336-337.
  • 2Ceder G,Chiang Y M,Sadoway D R,et al.Identification of cathode materials for lithium batteries guided by first-principles calculations[J].Nature,1998,392:694-696.
  • 3Wu C,Chen L Q,Huang X J,et al.Spectroscopic studies on cationdoped spinel LiMn2O4 for lithium ion batteries[J].Solid State Ionics,2001,144(3-4):277-285.
  • 4Ihm D W,Noh J G,Kim J Y.Effect of polymer blending and drawing conditions on properties of polyethylene separator prepared for Li-ion secondary battery[J].J Power Sources,2002,109(2):388-393.
  • 5Harvey S B,Robert B I,Melvin L D,et al.Microporous polymeric films[J].Ind Eng Chem Prod Res Dev,1974,13(1):2-9.
  • 6Kotaro T,Koichi K,Tatsuya T,et al.Microporous polyolefin membrane and method of producing same[P].US:5051183,1991-09-24.
  • 7Norimitsu K,Kotaro T,Koichi K,et al.Method of producing highly permeable microporous polyolefin membrane[P].US:6153133,2000-11-28.
  • 8Akinao H,Kazuo Y,Hitoshi M.Porous film of high molecular weight polyolefin and process for producing same[P].US:6048607,2000-04-11.
  • 9Pekala R W,Khavari M.Freestanding microporous separator including a gel-forming polymer[P].US:6586138,2003-07-01.
  • 10Kamei E,Shimomura Y.Process of producing porous thermoplastic resin article[P].US:4563317,1986-01-07

共引文献25

同被引文献40

  • 1陈薪.杨裕生:动力电池安全性不容小觑[J].低碳世界,2012(10):36-39. 被引量:11
  • 2胡传跃,李新海,王志兴,郭华军.锂离子电池电解液过充添加剂的行为[J].中国有色金属学报,2004,14(12):2125-2130. 被引量:20
  • 3李立,苑克国,张育川,胡塔光,王安邦,杨裕生.二次锂电池用PVDF-HFP/SiO_2复合聚合物隔膜的研究[J].北京化工大学学报(自然科学版),2006,33(2):55-58. 被引量:11
  • 4胡杨,李艳,钟盛文,李培植,王茹英,刘庆国.18650型锂离子电池的安全性能研究[J].电池,2006,36(3):192-194. 被引量:27
  • 5黄可龙.锂离子电池原理与关键技术[M].北京:化学工业出版社,2009.
  • 6Djian D, Alloin F, Martinet S, et al. Lithium-ion Batteries with High Charge Rate Capacity: Influence of the Porous Separator[ J]. Power Sources,2007,172 ( 1 ) :416 - 421.
  • 7唐少俊.奇瑞汽车股份有限公司.电池隔膜尺寸变化率的测试方法:中国,CN200910192073.4[P].2009-9-4.
  • 8唐少俊.奇瑞汽车股份有限公司.一种多微孔电池复合隔膜及其制备方法:中国,CN200910116807.0[P].2009-5-18.
  • 9杨卫国,江林,宫清,比亚迪股份有限公司.一种锂离子二次电池用聚酰亚胺隔膜以及锂离子电池:中国,CN200810218109.7[P].2008-12-1.
  • 10陈涛,江林,宫清,比亚迪股份有限公司.一种聚烯烃复合薄膜及其制备方法和用途:中国,CN200610172297.5[P].2006-12-30.

引证文献8

二级引证文献32

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部