期刊文献+

废纸脱墨浆DCS物化性质及其累积规律初探 被引量:1

Study on the Physicochemical Characteristics of DCS and Its Accumulation in the Deinked Pulp
在线阅读 下载PDF
导出
摘要 探讨了废纸脱墨浆中溶解和胶体物质(DCS)的物化性质及其累积规律,研究表明,废纸脱墨浆DCS含量、电导率、阳离子需求量主要由溶解物(DS)贡献,而浊度、Zeta电位主要由胶体物质(CS)引起;DCS粒径主要分布在2个区域:100-200nm和550-900nm,其中100-200nm粒径的物质累积速度较快;随着累积次数的增加,DCS中Na^2+、Ca^2+、Mg^2+、Al^3+累积速度快于Fe^2+。 The physicochemical characteristics of dissolved and colloidal substances (DCS) and its accumulation regular pattern in the deinked pulp were investigated. The results showed that the DCS content, conductivity and cationic demand of the deinked pulp are mainly contributied by the dissolved substance (DS). On the other hand, the turbidity and Zeta potential are attributed to the colloidal substance ( CS), the particle diameter of DCS mainly distributes from 100 nm to 200 nm and from 550 nm to 900 run, the accumulating speed of the particles with diameter from 100 nm to 200 nm is rapider than the particles with diameter from 550 nm to 900 nm, the accumulating speed of Na^+, Ca^2+ , Mg^2+ ,Al^3+ is rapider than Fe^2+ along with increasing the accumulating times.
出处 《中国造纸学报》 EI CAS CSCD 2008年第1期14-17,共4页 Transactions of China Pulp and Paper
基金 国家自然科学基金(项目编号:20576102)资助项目
关键词 废纸脱墨浆 DCS 物化性质 累积规律 deinked wastepaper pulp dissolved and colloidal substances physicochemical characteristics accumulating regular pattern
  • 相关文献

参考文献7

  • 1王旭,詹怀宇,赵光磊,何北海,AltafH.Basta,陈嘉翔,张棽.新闻纸厂过程用水DCS的物化特性与化学控制[J].中国造纸,2003,22(9):17-21. 被引量:15
  • 2Martin A Hubbe, Orlando J Rojas, Richard A Venditti. Control of Tacky Deposits on Paper Machines-A review [ J]. Nordic Pulp and Paper Research Journal, 2006, 21(2) : 154.
  • 3DONT V, VEN T, PARIS J. Distribution of Dissolved and Colloidal Substances in the Forming and Press Sections of a Paper Machine [ J ]. JPPS, 2003, 29 (9) : 294.
  • 4王旭,詹怀宇,赵光磊,何北海,AltafH.Basta,陈嘉翔,张棽.新闻纸厂过程用水DCS的来源与清除[J].中国造纸,2003,22(7):1-4. 被引量:43
  • 5Hannuksela T, Holmbom B. Stabilization of Wood-resin Emulsion by Dissolved Galactoglucomannans and Galactomannans [ J ]. JPPS, 2004, 30(6) : 159.
  • 6TRAFFORD JOHN. Pitch Investigations with Pinus Radiata Bisulphite and Thermomechaninal pulps [J]. Appita, 1988, 41(3) : 207.
  • 7Thompson C B. Paper Machine Corrosion and Progressive Closure of the White Water System [ C ]. Tappi proceedings, Papermakers Conference. Atalanta: Tappi Press, 1996.

二级参考文献13

  • 1Leroux R, Pruszynski P E, Armstrong J R, et al. Control of Stickies Contaminants in Newsprint Applications-Review, Mechanisms and Novel Approach[J]. Pulp & Paper Canada, 1997, 98(9): 315.
  • 2Thompson C B. Paper Machine Corrosion and Progressive Closure of the White Water System. Tappi Proceedings Papermakers Conference. Tappi Press,Atlanta, 1996. 545.
  • 3Curley J, Jones B, et al. Reducing the Reliance on Fresh Water.PITA Water Removal Conference, 1998. 49.
  • 4Zhang X. The Effects of White Water Dissolved and Colloidal Treatment and the Removal of Organic Components. Pulp & Paper Canada, 2000, 101(3): 59.
  • 5Ben Yuxia , Gilles Dorris, Geoff Hill, et al. Contaminant removal from deinking process water. Paprican, Pulp and Paper Report,2001.1536.
  • 6Kemper M. State-of-the-art and New Technologies in Flotation Deinking. Int. J. Mineral Processing, 1999, 56:317.
  • 7Ling T F. The Effects of Surface Properties on Stickies Removal by Flotation. Pulp & Paper Canada, 1994, 95(12) : 109.
  • 8Glittenberg D, Hemmes J L,Bergh N O. Cationnic Starches in System with High Levels of Anionic Trash. Paper Technology, 1994,35(9): 18.
  • 9Hirro Tanaka, Lars dberg, et al. Transfer of cationic polymers from cellulose fibers to polystyrene latex. Colloidal and Interface Science,1992, 149(1): 40.
  • 10Hirro Tanaka, Agne Swerin, et al. Transfer of Cationic Retention Aid from Fibers to Fine Particles and Cleavage of Polymer Chains Under Wet-End Papermaking Conditions. Tappi J, 1993,76(5):157.

共引文献54

同被引文献12

  • 1BARTON D A. Experience with water system closure at recycled paperboard mills[J]. Tappi Journal, 1996, 79(3):191-197.
  • 2BOURASSA C, DIAMOND M, SAIN M, et al. Mill system closure and trash catching porous fillers in pa- permaking[J]. Tappi Journal, 2003,86 (2) : 14-18.
  • 3CHAI X S, SAMP J C, YANG Q F, et aL. Determi- nation of microstickies in recycled whitewater by head- space gas chromatography[J]. Progress in Paper Recy- cling, 2007,16 (3) : 12-31.
  • 4GARVER T M. Impro,ling deinked pup {urnish using on-line analysis and control of dissolved substances [C]//Research Forum on Recycling. Beijing: K J Krause, 2001.
  • 5BIZA P. Talc-A modern solution for pitch and stickles control[J]. Paper Technology,2001(3) : 22.
  • 6LIU Chao, QIN Menghua, LI Zongguan. Analysis of characteristic of dissolved and colloidal substances inpoplar APMP[C] //Second International Papermaking and Environment Conference. Tianjin: Tianin Univer- sity of Science and Technology,2008:676-678.
  • 7SUNDBERG K, THORNTON J, PETTERSSON C, et al. Calcium-induced aggregation of dissolved and colloidal substances in mechanical pulp suspensions [J]. Journal of Pulp and Paper Science, 1994,20 (11) : 317-322.
  • 8BOBACKA V, EKLUND D. The influence of charge density of cationic starch on dissolved and colloidal material from peroxide bleached thermomechanical pulp[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 1999,152 (3) : 285-291.
  • 9LINDSTROM T, SOREMARK C, WESTMAN L. The influence on paper strength of dissolved and col- loidal substances in the white water[J]. Svensk Pap- perstidn, 1977,80(11) :341.
  • 10CRONIN W R. Effluent closer force close look at liq- uid/solid separation issues[J]. Pulp and Paper,2007, 97(6):59.

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部