期刊文献+

油马达驱动主轴可行性分析 被引量:1

Analyzing the practicability of oil motor driving spindle
在线阅读 下载PDF
导出
摘要 在液压传动中,液压马达作为执行元件对环境的保护有其特点;大扭矩液压马达以其低速稳定性、结构完善性、启动效率高、转动惯量小、使用时不需减速装置即可直接驱动、低速大扭矩负载等特点,得到广泛应用,因此油马达驱动主轴有其可行性。 In the process of hydraulic driving motion, oil motor that worked as an action element has specific significance in environment protection. Great torque oil motor is widely used for its low -speed stability characteristic, complete structure, high start efficiency and low rotational inertia, what's more, it could be directly drove without a graduating device. Thus oil motor driving spindle is practical.
出处 《机械研究与应用》 2007年第5期21-23,共3页 Mechanical Research & Application
关键词 驱动主轴 平稳性 液压传动 driving spindle stability hydraulic driving motion
  • 相关文献

参考文献5

  • 1IO.φ.波诺马连科.径向柱塞式低速大扭短液压马达理论[M].华中工学院,天津工穆机械研究所译.北京:机械工业出版社,1977.
  • 2路甬祥.液压与气动手册[M].北京:机械工业出版社,2002.
  • 3陈宇生,徐海铮,张辉,尹文生,王泽民,窦立宏,罗瓞生,贺淑兰.一种非圆齿轮轮系液压马达[J].工程机械,1999,30(10):18-19. 被引量:8
  • 4徐灏.机械设计手册(1)[M].北京:机械工业出版社,1992.3-378.
  • 5汪星桥.机床设计手册(3)[M].北京:机械工业出版社,1986.

二级参考文献1

共引文献9

同被引文献50

  • 1孙雅洲,梁迎春,董申.微小型化机床的研制[J].哈尔滨工业大学学报,2005,37(5):591-593. 被引量:24
  • 2李红涛,来新民,李成锋,倪军,林忠钦.介观尺度微型铣床开发及性能试验[J].机械工程学报,2006,42(11):162-167. 被引量:25
  • 3KIMMAN M H, LANGEN H H, EIJK J V, et al. Design and realization of a miniature spindle test setup with active magnetic bearings[C]// 2007 IEEE/ASMEInternational Conference on Advanced intelligent mechatronics, September 4-7, 2007, Zurch, Switzerland. Piscataway. IEEE, 2007: 1-6.
  • 4RIVIN E I, AGAPIOU J, BRECHER C, et al. Tooling structure: Interface between cutting edge and machine tool[J]. CIRP Annals-Manufacturing Technology, 2000, 49(2): 591-634.
  • 5SHIN W C, RO S K, PARK H W, et al. Development of a micro/meso-tool clamp using a shape memory alloy for applications in micro-spindle units[J]. International Journal of Machine Tools and Manufacture, 2009, 49 (7-8): 579-585.
  • 6NAKAYAMA S, WATANABE H, TAWA T, et al. Dental handpiece control device: USA, 4744752[P]. 1988-05-17.
  • 7LUO Xichun, CHENG Kai, WEBB D, et al. Design of ultraprecision machine tools with applications to manufacture of miniature and micro components[J]. Journal of Materials Processing Technology, 2005, 167 (2-3): 515-528.
  • 8CHAE J, PARK S S, FREIHEIT T. Investigation of micro-cutting operations[J]. Intemational Journal of Machine Tools and Manufacture, 2006, 46(3-4). 313-332.
  • 9KURITA T, HATTORI M. Development of new-concept desk top size machine tool[J]. International Journal of Machine Tools and Manufacture, 2005, 45(7-8): 959-965.
  • 10BROUSSEAU E, DIMOV S, PHAM D. Some recent advances in multi-material micro- and nano-manufacturing [J]. The International Journal of Advanced ManufacturingTechnology, 2010, 47(1): 161-180.

引证文献1

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部