期刊文献+

Preparation and Properties of Dip-coated CeO_2-TiO_2 Thin Golden Glass Film

Preparation and Properties of Dip-coated CeO_2-TiO_2 Thin Golden Glass Film
在线阅读 下载PDF
导出
摘要 The golden and ultraviolet-absorbed CeO2-TiO2 film was prepared on soda-lime glass substrate with the thickness of 2 mm via the sol-gel method. The transmission spectra in range of 200 nm-800 nm were measured, and the crystallization, the abrasion and acid resistance were also investigated. The appropriate sol contents and heat-treatment schedule were determined. The results indicate that the appropriate molar ratio of Ce/Ti was 3:5 to 5:6. The ultraviolet-absorbance ability increased with the increase of the Ce/Ti molar ratio, but when the Ce/Ti molar ratio was higher than 1.5, the homogeneity of the film was deteriorated. With the increase of heat-treatment temperature, the main wavelengths of the color of the coated glasses were equal, but the color' s saturation decreased; the transmission peaks were the same, while the intensity of the peaks decreased. The roughness, abrasion and acid resistance of the film were also enhanced at the same time. The appropriate heat- treatment temperature may be 340℃. The golden and ultraviolet-absorbed CeO2-TiO2 film was prepared on soda-lime glass substrate with the thickness of 2 mm via the sol-gel method. The transmission spectra in range of 200 nm-800 nm were measured, and the crystallization, the abrasion and acid resistance were also investigated. The appropriate sol contents and heat-treatment schedule were determined. The results indicate that the appropriate molar ratio of Ce/Ti was 3:5 to 5:6. The ultraviolet-absorbance ability increased with the increase of the Ce/Ti molar ratio, but when the Ce/Ti molar ratio was higher than 1.5, the homogeneity of the film was deteriorated. With the increase of heat-treatment temperature, the main wavelengths of the color of the coated glasses were equal, but the color' s saturation decreased; the transmission peaks were the same, while the intensity of the peaks decreased. The roughness, abrasion and acid resistance of the film were also enhanced at the same time. The appropriate heat- treatment temperature may be 340℃.
作者 李宏
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2007年第3期482-485,共4页 武汉理工大学学报(材料科学英文版)
基金 the National Natural Science Foundation of China (No.50472039) Hubei Provincial Natural Science Foundation of China (No.2005ABA011)
关键词 sol-gel method CeO2-TiO2 film dip-coating process sol-gel method CeO2-TiO2 film dip-coating process
  • 相关文献

参考文献8

  • 1F E Ghodsi,F Z Tepehan,G G Tepehan.Optical and Electrochromic Properties of Sol-gel Made CeO2±TiO2 Thin[].Electrochimica Acta.1999
  • 2D Camino,D Deroo,J Salardenne et al.(CeO2)x-(TiO2)l-x: Counter Clectrode Materials for Lithium Electrochromic Devices[].Solar Energy Materials and Solar Cells.1995
  • 3Ma Juanrong,Luo Yi,Liu Zhongwei.Application Technique in Building Glass[]..2005
  • 4Yuan Yisong,,Wu Bocheng,Luo Hongqi.Color Glass[]..1987
  • 5Janke N,Bieberle A,et al.Characterization of Sputter-Deposited WO3 and CeO2-x-TiO2 Thin Films for Electrochromic Applications[].Thin Solid films.2001
  • 6Akio Makishina,Mitsuaki ASAMI,Kenji WADA.Preparation of CeO2-TiO2 coatings by the sol-gel process[].Non-crystalline Solids.1988
  • 7Morimoto T,Mitani A,Tomonaga H.Ultraviolet ray absorbing coatings on glass for automobiles[].Thin Solid films.1999
  • 8Hiromichi Sakamoto,Jianbei Qiu,Akio Makishima.The preparation and properties of CeO2-TiO2 film by sol-gel spin-coating process[].Science and Technology of Advanced Materials.2003

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部