SMC/BMC用低收缩添加剂的研究进展
被引量:3
Development and Mechanism of Low Profile Additives for SMC/ BMC
摘要
介绍了SMC/BMC用低收缩添加剂的发展、收缩控制机理研究概况以及发展方向。
The article introduces the development of low profile additives (LPA) for SMC/ BMC and studies of shrinkage control mechanism of LPA, the tendency of LPA is also described.
出处
《绝缘材料》
CAS
2007年第3期18-21,共4页
Insulating Materials
参考文献22
-
1Lee Jeng-Huei,Lai Duen-Horng,Huang Yan-Jyi.Effects of Reactive Low-profile Additives on the Properties of Cured Unsaturated Polyester Resins.Ⅰ.Volume Shrinkage and Internal Pigmentability[J].Appl Polym Sci,2005(98):264-275.
-
2Cao Xia,James Lee L.Effect of Nanoclay on Efficiency of Low Profile Additives (LPAs) on Shrinkage Control of Unsaturated Polyester (UP) Resin[C].Annual Technical Conference-ANTEC,Conference Proceedings,v4,Society of Plastics Engineers Annual Technical Conference 2005,ANTEC 2005-Conference Proceedings,2005:348-352.
-
3Huang Yan-jyi,Chu Cheng-jou,Dong jyh-ping.Effects of Chemical Structure of Polyurethane-Based Low-profile Additives on the Miscibility,Curing Behavior,Volume Shrinkage,Glass Transition Temperatures,and Mechanical Properties for Styrene/Unsaturated Polyester/Low-profile Additive Ternary Systems.Ⅰ:Miscibility,Curing Behavior,and Volume Shrinkage[J].J Appl Polym Sci,2000(78):543-557.
-
4Huang Yan-jyi,Chu Cheng-jou,Dong Jyh-ping.Effects of Chemical Structure of Polyurethane-Based Low-Profile Additives on the Miscibility,Curing Behavior,Volume Shrinkage,Glass Transition Temperatures,and Mechanical Properties for Styrene/Unsaturated Polyester/Low-profile Additive Ternary Systems.Ⅱ:Glass Transition Temperatures and Mechanical Properties[J].J Appl Polym Sci,2000(78):558-568.
-
5Boukhili R,Boukehili H,Ben Daly H,et al.Physical and Mechanical Properties of Pultruded Composites Containing Fillers and Low Profile Additives[J].Polymer Composites,2006 (27):71-81.
-
6夏雨,田正刚,薛忠民,单松高,王继辉.树脂固化过程中相分离的研究[J].玻璃钢/复合材料,2004(3):45-46. 被引量:2
-
7Tian Jing.A novel Explanation of the Low-Profile Mechanism for Unsaturated Polymer Resins Using Phase Diagrams[J].Fibre Composites,1996,3(46):42-48.
-
8Boyard N,Vayer M,Sinturel C,et al.Study of the Porous Network Developed During Curing of Thermoset Blends Containing Low Molar Weight Saturated Polyester[J].Polymer,2005,46(3):661-669.
-
9Boyard N,Vayer M,Sinturel C,et al.Investigation of Phase Separation Mechanisms of Thermoset Polymer Blends by Time-resolved SAXS[J].European Polymer Journal,2005,41(6):1333-1341.
-
10Mohsan Haider,Pascal Hubert,Larry Lessard.Cure Shrinkage Characterization and Modeling of a Polyester Resin Containing Low Profile Additives[J].Applied Science and Manufacturing,2007,38(3):994-1009.
二级参考文献16
-
1[1]Wen Li and L James Lee. Shrinkage control of low-profile unsatu-rated polymer resins cured at low temperature[J]. Polymer, 1998,39(23):5677-5687.
-
2[2]C J Liu, M S Kiasat, A H J Nijhof, H Blokland and R Marissen. The effect of addition of a low profile additive on the curing shrink-age of an unsaturated polyester resin[J].Polymer Engineering and Science,1999,39(1):18-25.
-
3[3]W Li, L J Lee. Low temperature cure of unsaturated polyester resins with thermoplastic additives Ⅱ Structure formation and shrinkage control mechanis[J].polymer,2000,41:697-710.
-
4Alkins K E, et al. J. Appl. Poly. Sci. Plastic Compounding, 1988, 11: 35.
-
5Kinkelaar M, Muzumdar S, Lee L J. Polym. Eng.Sci. , 1995, 35(10): 823.
-
6Saito R, Kan W M J, Lee L J. Polymer, 1996, 37(16) :3567.
-
7Yan J, Liang C M. Polymer, 1996, 37(3): 401.
-
8Pandit S B, Nadkami Y M. Ind. Eng. Chem. Res.,1994, 33: 2778.
-
9Kim D S, Cho K, An J H, et al. J. Mart. Sci. , 1994,29 : 1854.
-
10K E Atkins, R L Seats, G C Rex. New development in low profile additives: low viscosity poly(vinyl acetate) LPA's [A]. International Composites Expo Proceeding [C],1998. session 5-D.
共引文献12
-
1周文英,齐暑华,寇静利,田建团.不饱和聚酯树脂增韧研究进展[J].热固性树脂,2005,20(1):37-42. 被引量:8
-
2萧倨南.不同等级及用量的TiO_2对TiO_2/UP复合材料力学性能的影响[J].高科技纤维与应用,2005,30(1):16-20.
-
3孙志杰,薛忠民,杨博,张佐光.LPA对UPR收缩率和力学性能的影响[J].北京航空航天大学学报,2005,31(10):1096-1100. 被引量:7
-
4陈剑楠,李玲.低收缩型不饱和聚酯树脂的研究进展[J].热固性树脂,2006,21(3):35-37. 被引量:4
-
5孙玉琢,商平,冯志鑫,刘美荣.废尼龙改性酚醛泡沫塑料的性能研究[J].橡塑资源利用,2007(6):3-6. 被引量:1
-
6谢青,游长江,曾一铮.不饱和聚酯改性研究新进展[J].广州化学,2009,34(1):65-70. 被引量:5
-
7徐永祥,李运德,师华,杨振波,冯雍.低收缩耐热冲击重防腐鳞片涂料的研究[J].中国涂料,2009,24(6):53-56. 被引量:2
-
8余爱民,王化能,彭西洋,张勇.真空压制荒料型人造岗石若干技术进展[J].中国陶瓷,2013,49(11):44-47. 被引量:1
-
9刘超凡,刘华,傅鹏飞,李山剑,钱建华,刘坐镇.MDI合成聚氨酯型不饱和树脂及其性能[J].材料科学与工程学报,2018,36(4):584-588. 被引量:3
-
10张翠妙,宋金梅,刘朋,毛雅赛.一种解决厚壁拉挤型材端面裂纹的方法及其机理分析[J].玻璃钢/复合材料,2019(5):71-76.
同被引文献28
-
1来育梅,王伟,王晓东,黄培.热塑性聚酰亚胺的热膨胀系数研究[J].塑料工业,2005,33(10):41-43. 被引量:6
-
2孙志杰,薛忠民,杨博,张佐光.LPA对UPR收缩率和力学性能的影响[J].北京航空航天大学学报,2005,31(10):1096-1100. 被引量:7
-
3付恒,陈玉廷.SMC的现状与发展[J].纤维复合材料,2005,22(3):58-60. 被引量:17
-
4孙巍,翟国芳,潘徽辉.低收缩/低波纹添加剂对SMC力学性能的影响[J].玻璃钢/复合材料,2006(6):25-27. 被引量:4
-
5姚文杰.浸渗技术在超大口径低压金属密封阀门上的应用[J].水利电力机械,2007,29(6):47-48. 被引量:3
-
6李忠恒,张宁,陶国良.SBS改性SMC复合材料的研究[J].玻璃钢/复合材料,2007(4):34-37. 被引量:10
-
7Kissinger H E. Reaction kinetics in differential thermal analysis[J]. Analytical Chemistry, 1957,29( 11 ) : 1 702-1 706.
-
8Ozawa T. Kinetic analysis of derivative curves in thermal analysis[J]. Journal of Thermal Analysis and Calorimetry, 1970, 2(3) :301-324.
-
9马希文.正交设计的数学理论[M].北京:人民教育出版社,1981.166-190.
-
10沈开猷.不饱和聚酯树脂及其应用[M]北京:化学工业出版社,2005447-453.
引证文献3
-
1吴盾,周金龙,刘春林,张兰芬,陈新杰,潘霁.低收缩率、高表面光泽度的不饱和聚酯片状模塑料实验研制[J].玻璃钢/复合材料,2012(6):80-85. 被引量:1
-
2凌霄,郑理,项尚林,王庭慰,王博.低收缩型有机浸渗密封剂的制备与表征[J].中国胶粘剂,2012,21(1):15-19. 被引量:3
-
3吴盾,章诚,张刚,成文俊,刘春林.团状模塑料抗收缩机理研究[J].常州大学学报(自然科学版),2016,28(3):19-22. 被引量:1
二级引证文献5
-
1郑理,董海,项尚林,王博.电阻突变法研究厌氧浸渗剂固化的影响因素[J].南京工业大学学报(自然科学版),2014,36(1):128-132. 被引量:1
-
2柴红梅,代海涛,丁勇钢.环氧树脂团状模塑料制备及其性能研究[J].玻璃钢/复合材料,2014(5):56-58. 被引量:4
-
3张慧敏,赵阳,胡守明,佘晓磊.DMC复合材料自动切割机的研发[J].机床与液压,2018,46(16):18-20.
-
4王博,郑理,宋璐,项尚林.可重复利用丙烯酸酯型浸渗密封剂的制备与表征[J].中国胶粘剂,2025,34(12):25-30.
-
5虞强,汪春能,王博,郑理.丙烯酸酯浸渗工艺在航空发动机零件密封上的应用[J].铸造技术,2016,37(9):1987-1990. 被引量:3