摘要
对阶梯阴极型L波段磁绝缘线振荡器（MILO）进行了实验研究。介绍了测试方法与测试系统；开展了阴极电子发射实验。发现阴极电子发射不均匀是对称结构MILO产生非对称微波模式的最关键的因素之一；并对二极管屏蔽环尺寸、扼流片半径、提取间隙等进行了研究。在电子束电压约420kV、电流33kA的条件下，得到了阶梯阴极型L波段MILO的高功率微波辐射功率为1．22～1．47GW，脉宽大于20ns，频率为1．21GHz。柬波转换效率约为10％。器件产生微波模式为TM01模。经过模式转换器后的辐射模式为TE11模。
A ladder cathode L-band MILO is experimentally investigated. The measurement methods and measurement system are introduced. The proper cathode material is selected and the cathode emission of electrons is investigated, then one of the key factors is obtained, which results in an asymmetric microwave mode generated by symmetric MILO. Additionally, other factors are also investigated, which can affect the output microwave power such as the dimension of the diode shelter, the diameter of the choke vanes, the extraction gap, and so on. After experimental investigation, employing an electron beam of about 420 kV and 33 kA, ladder cathode L-band MILO generates 1.22-1.47 GW of high power microwave with over 20 ns of pulse duration at 1.21 GHz. The conversion efficiency between electrons and microwave is about 10%. The generated microwave mode is TM01 and resorting to mode converter, the radiation microwave mode is TE11.
出处
《强激光与粒子束》
EI
CAS
CSCD
北大核心
2007年第5期820-824,共5页
High Power Laser and Particle Beams
基金
国家863计划项目资助课题
