摘要
为了了解激光功率和扫描速度变化对淬火层深和表面硬度影响的敏感性,从实验和理论模拟两方面开展了相关研究。在满足激光输入能量相等的条件下,采用按相同倍率提高激光功率或降低扫描速度的方法,研究淬火层深和表面硬度的相应变化。研究结果表明,按相同倍率改变激光功率或扫描速度均会对层深产生明显影响,而激光功率变化的影响更大;但仅改变激光功率或扫描速度不会对表面硬度产生很大影响,相对而言,扫描速度变化对表面硬度的影响略大一些。进一步通过对激光扫描温度场及加热、冷却速度的理论模拟,对上述研究结果做出了合理的理论解释。
Both from experiments and theoretical analysis, the influenceof laser processing parameters on the case-depth and the hardness in laser quenching was studied. Under the condition of equal input laser energyand different laser power and scanning velocity, the variation of the case-depth and the hardness was measured. Measurement results show that the change of both the laser power and the scanning velocity can affect the case-depth and the hardness obviously and the change of laser power affects the case-depth more significantly. On the other hand, the change of either the laser power or the scanning velocity has a little influence on the hardness. Correspondingly, the change of the scanning velocity has a little more influence on the hardness. By means of analytical simulation of the temperature distribution and the heating/cooling rates under the laser scanning, reasonable explanation for the results was put forward.
出处
《激光技术》
CAS
CSCD
北大核心
2007年第2期163-165,174,共4页
Laser Technology
基金
上海市教委科技发展基金资助项目(03ik10)
关键词
激光技术
激光淬火
工艺参数
影响
敏感性
laser technique
laser quenching
processing parameters
influence
sensitivity
