摘要
主要是研究在高速粗铣削加工淬硬钢AISIH13时,为了获得高的金属切削量,采用高轴向切削深度(10mm≤轴向切削深度≤20mm)的可能性。研究结果表明,在高轴向切削深度情况下,选择往复行切刀具路径方案最为有利,从而使刀具寿命长、金属切削量大、切削加工时间短、金属体积去除率高。
The aim axial depths of cut objective of the paper （10 mm axial depth is to investigate the feasibility of employing high of cut 20 mm） when high speed rough milling hardened AISI H13 steel in order to achieve high volume of metal removed at the expense of low machining time. In conclusion, where long tool life, high volume of metal removed, short machining times and high volumetric removal rates were concerned, raster cutter path strategy was the most favourable at all high axial depths of cut employed.
出处
《模具制造》
2007年第3期59-63,共5页
Die & Mould Manufacture
关键词
淬硬钢
高速粗铣削加工
模具
刀具路径
hardened steel
high speed rough milling
die ＆ mold
cutter path
