期刊文献+

快速凝固铝硅合金粉末加热过程中硅颗粒的粗化行为 被引量:5

Coarsening Characteristic of Si Particles in Powders of Rapidly Solidified Al-Si Alloy
在线阅读 下载PDF
导出
摘要 利用差示扫描量热仪(DSC)、电子显微镜等设备对Al-12.8%Si合金粉末的原始状态及热处理后的状态进行了分析。发现其显微组织有两个连续的变化过程:在156℃时,固溶在基体Al中的过饱和Si开始析出,并在340℃发生粗化,随着加热温度的升高,粗化现象仍然存在。另外,对Si颗粒的粗化机理进行了研究,发现其粗化符合经典的LSW理论。 The powders of Al-12.8%Si alloy were studied by differential scanning calorimetry and electron microscope. Two successive types of microstructure development were found to appear in different temperatures. In 156 ℃ the supersaturated Si was decomposed from the primary AI, and structural coarsening of Si particles in 340 ℃ .The coarsening behavior was still existed when the heating temperature being elevated. Otherwise, the coarsening mechanism was studied and proved to be according with the classical LSW theory.
出处 《铸造》 EI CAS CSCD 北大核心 2007年第1期65-67,共3页 Foundry
关键词 快速凝固 Al-Si合金粉末 Si颗粒的粗化 rapidly solidification powders of AI-Si alloys coarsening beha of Si particles
  • 相关文献

参考文献14

  • 1SRIVASTAVA V C,MANDAL R K,OJHA S N..Microstructure and mechanical properties of Al-Si alloys produced by spray forming process[J].Materials Science and Engineering A,2001,304/306:555-558.
  • 2ZHOU J,DUSZCZYK J,KOREVAAR B M.As-spray-deposited structure of an Al-20Si-5Fe spray perform and its development during subsequent processing[J].Journal of Materoals Science,1991,26:5 275-5 291.
  • 3VASUDEVAN VIJAY K,HAMISH L,FRASER.The microstructures of rapidly solidified and heat-treated Al-8Fe-2Mo-Si alloys[J].Materials Science and Engineering,1988,98:131-136.
  • 4XIONG Bai-qing,ZHANG Yong-an,WEI Qiang,et al.The study of primary Si phase in spray forming hypereutectic Al-Si alloy[J].Journal of Materials Processing Technology,2003,137:183-186.
  • 5CHEN C M,YANG C C,CHAO C G.Thixocasting of hypereutectic Al-25Si-2.5Cu-1Mg-0.5Mn alloys using densified powder compacts[J].Materials Science and Engineering A,2004,366:183-194.
  • 6STOICHEV N,PETROV K,YANEVA S,et al.Microstructural development in Al-Si microcrystalline alloys[J].Materials Science and Engineering,2002,A337:12-16.
  • 7RAO K P,ZHOU J B.Characterization of mechanically alloyed Ti-Al-Si powder blends and their subsequent thermal stability[J].Materials Science and Engineering,2002,A338:282-298.
  • 8HYUCK MO LEE,ALLEN SAMUEL M,GRUJICIC MICA.Coarsening resistance of M2C carbides in secondary hardening steels:Part Ⅰ.Theoretical model for multicomponent coarsening kinetics[J].Metallurgical Transactions,1991,A22:2863-2 868.
  • 9BHATTACHARYYA S K,RUSSELL K C.Coarsening kinetics of silica in copper[J].Metallurgical Transactions,1976,A7:453-462.
  • 10JOHNSON C H,RICHTER S K,HAMILTON C H,et al.Static grain growth In a microduplex Ti-6Al-4V alloy[J].Acta Mater.,1999,47:23-29.

同被引文献94

引证文献5

二级引证文献33

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部