期刊文献+

空气压缩机后冷却器传热强化试验研究 被引量:3

An experimental study on heat transfer enhancement of air compressor aftercooler
在线阅读 下载PDF
导出
摘要 以横纹管、光滑管为元件,以压缩空气-水为介质的整机对比试验结果表明,横纹管对于压缩空气的冷却有显著的传热强化效果。在试验的压缩空气质量流量范围内,横纹管冷却器的总传热系数比光滑管冷却器的提高77%~66%。在额定的质量流量条件下,横纹管的总传热系数提高75%,可相应节省换热面积43%。横纹管冷却器的总压降约比光滑管的高一倍。文内还讨论分析了横纹管的传热强化机理。 aking the plain tube and transversely corrugated tube as the elements and the compressed air and water as the mediums,an experimental study of heat transfer of practical machine has been done. The experimental results have shown that the transversely corrugated tube is very effective for heat transfer enhancement of compressed air cooler.It′s overall heat transfer coefficient is as much as 1.77~1.66 times of plain tube within the range of experimental mass flow.Under the special mass folw,It′s overall heat transfer coefficient is as much as 1.75 times of plain tube,or It′s heat exchange area can be cut down by 43%.The overall pressure drop of air cooler of transversely corrugated tube is about as much as 2 times of plain tube. The mechanism of heat transfer enhancement of transversely corrugated tube was discussed.
出处 《化学工程》 CAS CSCD 北大核心 1996年第5期13-16,12,共5页 Chemical Engineering(China)
关键词 冷却器 压缩空气 传热强化 空气压缩机 heat transfer enhancement,transversely corrugated tube,plain tube,aftercooler of air compressor
  • 相关文献

参考文献8

二级参考文献9

  • 1陆应生,化工进展,1988年,3期,10页
  • 2马庆芳,换热器.设计与理论源典,1983年
  • 3范鸣玉,最优化技术基础,1982年
  • 4谭盈科,化学工程校际学术讨论会,1981年
  • 5李向明,1981年
  • 6庄礼贤,广州市化工学会第二届会员代表大会论文,1980年
  • 7庄礼贤,陆应生,李伟立,吴江滨,谢裕林.机械加工表面多孔管(E管)蒸发器与低肋管蒸发器的整机试验研究[J]制冷学报,1987(02).
  • 8曹德胜.人人关注大气层中臭氧层的保护[J].制冷学报,1989,11(2):1-3. 被引量:3
  • 9陆应生,庄礼贤,阮志强,崔乃瑛.高效换热元件——横纹管[J].化工进展,1988,7(3):10-13. 被引量:12

共引文献26

同被引文献20

  • 1孙东亮,王良璧.含扭曲带管内流动与传热的数值模拟[J].化工学报,2004,55(9):1422-1427. 被引量:15
  • 2张永福,李方钺.管内螺旋线圈强化传热的研究及在锅炉的应用[J].热能动力工程,1993,8(1):10-14. 被引量:5
  • 3姚玉英.化工原理[M].天津:天津科学技术出版社,2001.206-300.
  • 4Agrawal K N,Varma H K,Lal S. Pressure drop during forced convection boiling of R-12 under swirl flow[J]. Journal of Heat Transfer,1982,104(4):758-762.
  • 5Uttarwar S B,Rao M R. Augmentation of laminar flow heat transfer in tubes by means of wire coil inserts[J]. Journal of Heat Transfer,1985,107(4):930-935.
  • 6Date A W,Singham J R. Numerical prediction of friction and heat transfer characteristics of fully developed laminar flow in tubes containing twisted tapes[J]. Journal of Heat Transfer,1972:ASME Paper No.72-HT-17.
  • 7Date A W,Gaitonde U N. Development of correlations for predicting characteristics of laminar flow in a tube fitted with regularly spaced twisted-tape elements[J]. Experimental Thermal and Fluid Science,1990,3(4):373-382.
  • 8Eiamsa-Ard S,Thianpong C,Eiamsa-Ard P,et al. Convective heat transfer in a circular tube with short-length twisted tape insert[J]. International Communications in Heat and Mass Transfer,2009,36(4):365-371.
  • 9Eiamsa-Ard S,Promvonge P. Performance assessment in a heat exchanger tube with alternate clockwise and counter-clockwise twisted-tape inserts[J]. International Journal of Heat and Mass Transfer,2010,53(7):1364-1372.
  • 10Salman S D,Kadhum A A H,Takriff M S,et al. CFD simulation of heat transfer and friction factor augmentation in a circular tube fitted with elliptic-cut twisted tape inserts[J]. Mathematical Problems in Engineering,2013. DOI:10.1155/2013/163839.

引证文献3

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部