期刊文献+

型钢混凝土柱粘结滑移性能及ANSYS数值模拟方法研究 被引量:25

Research on the Bond-Slip Behavior and Numerical Simulation of Steel Reinforced Concrete Columns by ANSYS Program
在线阅读 下载PDF
导出
摘要 进行了20个型钢混凝土构件的推出试验、20根型钢混凝土偏心受压柱试验,以及23根型钢高强混凝土柱在反复荷载作用下的试验。通过在型钢与混凝土之间埋设的电子滑移传感器和电阻应变片,得到了粘结应力和内部滑移沿型钢埋置长度的分布规律;考虑了混凝土强度、型钢的保护层厚度和埋置长度,以及横向配箍率等诸因素,建立了型钢混凝土粘结强度的计算公式;分析了构件长细比、荷载偏心距对粘结强度和滑移应变的影响,提出了偏心受压柱粘结滑移本构关系的一般表达式;研究了型钢高强混凝土柱在动力作用下粘结滑移的分布规律和粘结退化机理,提出了反复加载条件下的粘结滑移本构模型。结合目前广泛应用的大型商业软件ANSYS程序,对型钢混凝土构件的非线性有限元分析方法进行了研究,全面介绍了数值计算中所涉及到的材料模型定义、几何模型建立、单元划分、约束条件处理等技术问题,并提出了采用非线性弹簧单元(Combination39单元)对型钢混凝土粘结滑移进行模拟的实用方法。 The bond-slip tests were carried out on 20 push-out specimens,20 steel reinforced concrete columns in eccentric compression, and 23 steel-high strength concrete columns under horizontal repeated and reversed loading. By means of electric slip sensors and strain gauges embedded between the shaped steel and the concete,the distributions of bond stress and slip along anchorage length were measured. The regression formulae for determining the bond strengths were established with taking account to such factors as the strength of concrete,concrete cover,embedded length of the shaped steel and transverse stirrup ratio. The influences of slenderness ratio, load eccentricity on the bond strength and the slip strain were analyzed. The bond slip constitutive equations for steel reinforced concrete column in eccentric compression were proposed. The distributions of bond-slip and mechanism of bond degeneration under horizontal repeated and reversed loading for steel high strength concrete column were also studied, and the bond-slip constitutive models under cyclic loading were put forward. By combination with the widely used ANSYS ,orogram.the nonlincar finite clement method for analysis of steel reinforced concrete members was sudied.The major skills of numerical simulating such as the definition of the material property,cstablishment of the geomctrical models.plotting of the clement and the definition of the houndary conditions were fully illustrated.The practica methods for simularing the bond slip relationships by nonlinear spring element of combination39 type were cspecially proposed.
出处 《建筑钢结构进展》 2006年第5期8-16,共9页 Progress in Steel Building Structures
基金 国家自然科学基金资助项目(资助号50108013) 陕西省自然科学基础研究计划项目(2002E213) 陕西省教育厅自然科学专项基金资助项目(01JK173)
关键词 型钢混凝土(SRC) 粘结滑移 本构关系 数值模拟 steel reinforced concreted(SRC) bond slip constitutive relationship numerical simulation
  • 相关文献

参考文献11

  • 1[2]American Institute of Steel Construction[S].Load and resistance factor design specification for structural steel buildings,1999
  • 2[3]European Committee for Standardization[S].Eurocode 4.Design of composite steel and concrete structures,1994
  • 3赵根田,李永和,杨丽梅.型钢与混凝土的粘结性能研究[J].包头钢铁学院学报,2004,23(4):360-363. 被引量:32
  • 4薛建阳,杨勇,赵鸿铁.型钢混凝土结构粘结强度的试验研究(英文)[J].西安建筑科技大学学报(自然科学版),2005,37(2):149-154. 被引量:5
  • 5[11]Hamdan M.,Hunaiti Y.Factors affecting bond strength in composite columns[A].Proceedings of 3rd International Conference on Steel-Concrete Composite Structures[C].Fukuoka,Japan,1991:213-218.
  • 6[12]Roeder C W,Chmielowski R A,and Brown C B.Shear Connector Requirements for embedded steel sections[J].Journal of Structural Engineering,ASCE,1999,125(2):142-151
  • 7[14]Li J H,Zhao H T,and Xue J Y.Experimental study on seismic performance of steel reinforced high-strength concrete columns[A].Proceedings of 8th International Symposium on Structural Engineering for Young Experts[C],Xi'an,China,2004
  • 8[17]Salari M R,Spacone E,Shing P B et al.Nonlinear analysis of composite beams with deformable shear connectors[J].Journal of Structural Engineering,ASCE,1998,124(10):1148-1158
  • 9[18]Roeder C W,Cameron B,Brown C B.Composite action in concrete filled tubes[J].Journal of Structural Engineering,ASCE,1999,125(5):477-484
  • 10杨勇,郭子雄,薛建阳,赵鸿铁,聂建国.型钢混凝土粘结滑移性能试验研究[J].建筑结构学报,2005,26(4):1-9. 被引量:83

二级参考文献26

  • 1赵根田,李永和,杨丽梅.型钢与混凝土的粘结性能研究[J].包头钢铁学院学报,2004,23(4):360-363. 被引量:32
  • 2王祖华 钟树生.劲性钢筋混凝土梁的非线性有限元分析[A]..混凝土结构基本理论及应用(第二届学术讨论会论文集)[C].北京,1990.609-616.
  • 3NILSON A H. Internal measurement of bond-slip[J]. Journal of ACI, 1972,69(7):439-441.
  • 4BRYSON J O, MATHEY R G. Surface condition effect on bond strength of steel beams in concrete[J]. Journal of ACI, 1962, 59(3): 397-406.
  • 5HAWKINS N M. Strength of concrete encased steel beams[J]. Civil Engineering Transaction of the Institution of Australia Engineer, 1973, CE15 (1), 39-46.
  • 6CHARLES C W. Bond stress in embedded steel shapes in concrete[C]. Composite and Mixed Construction[A]. ASCE, 1984.
  • 7李红.[D].西安建筑科技大学,1995.
  • 8坪井善胜,若林,末永保美. 骨筋コンクリ一トにする验的研究[J]. 日本建筑学会论文报告集第57号,1956,(7):549-552.
  • 9CHARLES W R, ROBERT C. Shear connector requirements for embedded steel sections[J]. Journal of Structural Engineering, ASCE, 1999, 125(2):142-152.
  • 10LAHNERT B J, HOUDE J, GERSTLE K H. Direct measurement of slip between and concrete[J]. Journal of ACI, 1986,83(11):974-982.

共引文献124

同被引文献183

引证文献25

二级引证文献107

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部