期刊文献+

有源电力滤波器电流检测误差分析 被引量:6

Detection error analysis of active power filter
在线阅读 下载PDF
导出
摘要 有源电力滤波器的谐波电流检测环节决定系统的补偿性能。针对基于park变换的dq检测方法,对基于该方法的电流检测误差进行深入分析,包括锁相环鉴相的频率和相位误差对检测误差的影响,以及低通滤波器对检测误差的影响。探讨了不同电压环境下的误差形成原因,得出直流侧电压调整参考量在不平衡电压下影响检测精度等结论,并通过仿真验证。 The harmonic current detection of APF(Active Power Filter)decides its compensation performance. The dq detection method based on park transformation is researched,and its current detection error is analyzed deeply,including influences of the frequency and phase errors of PLL (Phase-Locked Loop) and the low-pass filter on current detection error. The causes are discussed under different voltage environments. Conclusions,such as the DC voltage adjustment influences the detection precision when voltage is unbalanced,are drawn and verified with simulation.
作者 唐蕾 陈维荣
出处 《电力自动化设备》 EI CSCD 北大核心 2005年第10期29-32,共4页 Electric Power Automation Equipment
关键词 有源电力滤波器 谐波 dq电流检测 误差 active power filter harmonic dq current detection error
  • 相关文献

参考文献6

  • 1王兆安 杨军 刘进军.谐波抑制和无功功率补偿[M].北京:机械工业出版社,2002..
  • 2JAIN S K,AGARWAL P,GUPTA H O. Design simulation and experimental investigations on a shunt active power filter for harmonic and reactive power compensation[J].Electric Power Components and Systems,2003, (31):671 - 692.
  • 3游小杰,李永东,Victor Valouch,郝瑞祥.并联型有源电力滤波器在非理想电源电压下的控制[J].中国电机工程学报,2004,24(2):55-60. 被引量:71
  • 4DELL A A,LECCI A. A shunt active filter control for one phase and three phase four wire systems [A].Proceedings of the 2002 IEEE International Symposium on Industrial Electronics[C]. [s.l.]:IEEE,2002.1301 - 1305.
  • 5李庚银,陈志业,丁巧林,王昕伟.dq0坐标系下广义瞬时无功功率定义及其补偿[J].中国电机工程学报,1996,16(3):176-179. 被引量:144
  • 6WakilehGJ.电力系统谐波-基本原理、分析方法和滤波器设计[M].北京:机械工业出版社,2003..

二级参考文献5

  • 1王兆安杨君刘进军.谐波抑制和无功功率补偿[M].北京:机械工业出版社,1998..
  • 2杨仁刚,博士学位论文,1993年
  • 3王兆安,电工技术学报,1992年,3期
  • 4杨以涵,华北电力学院学报,1986年,3期
  • 5公茂忠,刘汉奎,顾建军,徐殿国.并联型有源电力滤波器参考电流获取的新方法[J].中国电机工程学报,2002,22(9):43-47. 被引量:56

共引文献241

同被引文献48

引证文献6

二级引证文献35

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部