期刊文献+

高拱坝坝肩稳定分析中拉裂面的作用机理研究 被引量:8

On working mechanism of tensional surfaces in abutment stability analysis of arch dam
在线阅读 下载PDF
导出
摘要 在拱坝坝肩稳定分析的刚体极限平衡法里,一般认为滑移体拉裂面完全脱开,不考虑其上的岩体抗力,对高拱坝而言,这种做法可能使稳定分析过于保守。基于三维有限元分析的多重网格分析方法,可以将三维有限元分析成果投影到任一滑面网格上,进而求得其上的应力分布及合力,以及滑面和滑块的安全系数。利用此方法对溪洛渡高拱坝工程的坝肩关键滑块的分析研究表明,直至超载3倍时,虽有部分区域受拉,拉裂面就合力来说仍处于受压状态,故拉裂面提供的抗力在较大荷载变幅内是可资利用的。计算表明计入拉裂面岩体抗拉力后,块体稳定安全度有显著的提高。 In this paper, based on the multigrid elasto-plastic FEA, we analyzed Xiluodu arch dam, got the stress distributions of the tension-crack surfaces of C3-blocks during overloading, computed and compared the safety factor of blocks of each load step,analysed the change process of the stress and yield field of sliding surfaces quantificationally, further discussed the mechanism of blocks destabilizing under overloading. The result showed that, during the overloading, some place were broken in tensioncrack surfaces, the area where tensile stress appeared increased and distributed near the dana;the safety factor of blocks increased in the condition of considering the effect of tension-crack surfaces。
机构地区 清华大学
出处 《水力发电》 北大核心 2005年第7期36-38,54,共4页 Water Power
基金 国家自然科学基金资助项目(50279016) 973课题资助项目(2002CB412708)
关键词 刚体极限平衡法 块体 拉裂面 高拱坝 rigid limit equilibrium method blocks tension crack surfaces arch dam
  • 相关文献

参考文献5

二级参考文献7

  • 1郑颖人 沈珠江 龚晓南.岩土塑性力学原理[M].北京:中国建筑工业出版社,2002..
  • 2常亮明 王勖成.弹塑性有限元分析的有效数值方案[J].固体力学学报,1984,(1):37-48.
  • 3王勖成 常亮明.运动硬化材料本构关系的精确积分及其推广应用 [J].力学学报,1986,18(3):37-48.
  • 4Schreyer H L, Kulak R F, Kramer J M. Accurate numerical solutions for elastic-plastic models [J].Journals of pressure Vessel Technology,1979,101:226-234.
  • 5周维垣,杨若琼.混凝土拱坝整体三维有限元非线性分析(TFINE有限元程序系列)[R].北京:清华大学水利水电工程系,1988.
  • 6Schreyer H L,Kulak R F,Kramer J M.Accurate numerical solutions for elastio-plastic models[J].Journals of Pressure Vessel Technology,1979,(101):226~234
  • 7杨强,陈新,周维垣.基于D-P准则的三维弹塑性有限元增量计算的有效算法[J].岩土工程学报,2002,24(1):16-20. 被引量:50

共引文献77

同被引文献91

引证文献8

二级引证文献55

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部