期刊文献+

低Si对Mg-8Zn-4Al-0.3 Mn合金组织和性能的影响 被引量:8

Effects of Low Si Content on Microstructure and Properties of Mg-8Zn-4Al-0.3Mn Alloy
在线阅读 下载PDF
导出
摘要 研究了低Si合金化对Mg8Zn4Al0.3Mn合金组织和性能的影响。试验表明Si能明显提高合金的流动性和耐磨性,并能细化合金晶粒。当Si量(质量分数)小于0.41%时,合金的显微硬度、刚度、强度和塑性都得到了明显的提高。而当Si量(质量分数)达0.69%时,由于汉字状Mg2Si的出现,导致合金的显微硬度、刚度和塑性呈现下降趋势。同时由于剩余液相中Zn、Al摩尔浓度的降低使得τ相的析出受到抑制,而φ相的析出得到促进。 Effects of low Si content on the microstructure and properties of Mg-8Zn-4Al-0.3Mn alloy were investigated.It was found that the fluidity and wear resistance of the alloy can be remarkably improved by adding Si,and the grain size can be refined also.The micro-hardness,rigidity,tensile strength and plasticity of the alloy can be obviously increased with Si content lower than 0.41% while can be remarkably decreased due to the occurrence of character Mg_2Si phase in the alloy with the Si content up to 0.69%,meanwhile,precipitation of τ phase can be restrained and precipitation of φ phase can be promoted resulting from the decrease of Zn,Al atomic fraction in residual liquid phase.
机构地区 郑州大学
出处 《特种铸造及有色合金》 CAS CSCD 北大核心 2005年第7期400-402,共3页 Special Casting & Nonferrous Alloys
基金 河南省高校创新人才基金资助项目(豫教2002-10)。
关键词 MG-ZN-AL合金 SI 力学性能 Mg-Zn-Al Alloy,Si,Mechanical Mechanicaly Properties
  • 相关文献

参考文献10

二级参考文献29

  • 1张诗昌,魏伯康,林汉同,王立士.钇及铈镧混合稀土对AZ91镁合金铸态组织的影响[J].中国有色金属学报,2001,11(z2):99-102. 被引量:82
  • 2闵学刚 孙扬善.Bi,Sb,Ca和Si对AZ91合金的组织和性能的影响[J].中国有色金属学报,2002,12:166-171.
  • 3[5]YUAN Guang-yin, SUN Yang-shan, DING Wen-jiang, et al. Effect of bismuth and antimony additions on the microstructure and mechanical properties of AZ91 magnesium alloy[J]. Mater Sci Eng A, 2001, A308: 38-44.
  • 4[6]WANG Qu-dong, CHEN Wen-zhou, ZEN Xiao-qin, et al. Effect of Ca addition on the microstructure and mechanical properties of AZ91 magnesium alloys[J]. Journal of Materials Science, 2001, 36: 3035-3040.
  • 5[7]LU Yi-zhen, WANG Qu-dong, ZENG Xiao-qin, et al. Effects of rare earth on the microstructure properties and fracture behavior of Mg-Al alloys[J]. Mater Sci Eng A, 2000, A278: 66-76.
  • 6[8]Lou A, Shinoda T. SAE Technical Paper Series[R] . 1999, 980086: 1.
  • 7[9]Lou A, Shinoda T. Development of a creep-resistant magnesium alloy for die casting applications[A]. Mordike B L, Kainer K U. Magnesium Alloys and Their Applications[C]. Werkstoff-Informationsgeserschaft, Wolfsburg, Germany, 1998: 151-156.
  • 8[10]Avedusian M M, Baker H. Magnesium and Magnesium Alloys, ASM Specialty Handbook[M]. Materials Park, OH: ASM International, 1999.
  • 9[11]Zhang Z, Tremblay R, Dube D, et al. Solidification microstructure of ZA102, ZA104 and ZA106 magnesium alloys and its effect on creep deformation[J]. Canadian Metallurgical Quarterly, 2000, 39(4): 503-512.
  • 10Lee Y C,Dahle A K,StJohn D H.The Role of Solute in Grain Refinement of Magnesium.Metallurgical and Materials Transactions,2000,31A:2 895~2 906

共引文献148

同被引文献133

引证文献8

二级引证文献37

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部