摘要
用Ｇｌｅｅｂｌｅ１５００热模拟机研究了原位熔化凝固的４０Ｃｒ和２０Ｍｎ２钢的应变速率对热塑性和强度的影响。用扫描电镜（ＳＥＭ）和光学显微镜（ＯＭ）分别观察了试验后试样的断口形貌和断口附近区域的显微组织。试验结果表明，４０Ｃｒ和２０Ｍｎ２钢在７００～１３００℃温度范围的塑性随着应变速率的增加而提高。
The influence of strain rates on the hot ductility and strength of steels 400r and ZoMnZ solidified in situ was studied using Gleeble 1500 simulating testing machine. The fracture morphology and the microstructure at the region near fracture were observed by scanning electron microscope (SEM) and optical microscope (OM) respectively. The test results indicated that the ductility of steels increases with an increase in strain rate of steels in the temperature range from 700℃ to 1300℃.
出处
《特殊钢》
北大核心
1994年第6期70-74,共5页
Special Steel
关键词
动记再结晶
热塑性
一次晶体
应变速率
钢
Dynamic Recrystallization, Hot DUctility, Primary Crystal, Strain Rate
