期刊文献+

Temperature Distribution in Ethylene Pyrolyzer 被引量:3

Temperature Distribution in Ethylene Pyrolyzer
在线阅读 下载PDF
导出
摘要 A good understanding of the detailed temperature distribution in the furnace plays an important role in the implementation of operation optimization and design improvement of ethylene pyrolyzer. Numerical simulation of the turbulent flow, combustion and heat transfer was carried out to investigate the temperature distribution in industrial furnace. Inhomogeneities of the flue-gas temperature distribution were observed in X, Y, and Z direction of the furnace from the simulated results. Along the height of the furnace, the average flue-gas temperature increased initially and decreased afterward, and reached its peak at the height of 5 m. The reactor tube skin temperature varied not only along the height of the furnace, but also around the circumference of the tube. The heat flux profiles from the furnace towards the reactor tubes followed the shape of the average flue-gas temperature profile. The heat flux of the inlet tubes was constantly higher than that of the outlet tubes at the same height in the furnace. Abstract A good understanding of the detailed temperature distribution in the furnace plays an important role in the implementation of operation optimization and design improvement of ethylene pyrolyzer. Numerical simulation of the turbulent flow, combustion and heat transfer was carried out to investigate the temperature distribution in industrial furnace. Inhomogeneities of the flue-gas temperature distribution were observed in X, Y, and Z direction of the furnace from the simulated results. Along the height of the furnace, the average flue-gas temperature increased initially and decreased afterward, and reached its peak at the height of 5m. The reactor tube skin temperature varied not only along the height of the furnace, but also around the circumference of the tube. The heat flux profiles from the furnace towards the reactor tubes followed the shape of the average flue-gas temperature profile. The heat flux of the inlet tubes was constantly higher than that of the outlet tubes at the same height in the furnace.
出处 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2003年第6期622-625,共4页 中国化学工程学报(英文版)
关键词 ETHYLENE pyrolyzer FURNACE reactor tube FLUE-GAS TEMPERATURE heat flux 乙烯裂解炉 化工设备 温度分布 热流量 数学模型 炉管出口温度
  • 相关文献

参考文献2

二级参考文献5

  • 1于遵宏,孙杏元,潘惠琴,蔡国强,曹恩洪.转化炉三维空间温度分布计算(蒙特卡罗法)[J]华东化工学院学报,1984(03).
  • 2杨光炯.管式炉辐射室传热计算——罗伯-依万斯与别洛康方法的比较[J]石油炼制与化工,1984(12).
  • 3黄祖祺.用Lobo-Evans法编制程序计算管式炉辐射室传热[J]石油炼制与化工,1983(11).
  • 4于遵宏,沈才大,潘惠琴,蔡国强,孙杏元.在方箱炉、圆筒炉中区域法计算辐射传热的数学模型及其应用[J]化工学报,1980(02).
  • 5油田轻质油热裂解制乙烯反应动力学数学模型——数学模型(Ⅱ)[J]大庆石油学院学报,1980(01).

共引文献8

同被引文献27

  • 1宋芙蓉,戴伟,杨元一.世界乙烯工业发展述评[J].石油化工,2004,33(12):1117-1123. 被引量:26
  • 2王福岗,李德俊,谭家隆,谭毅.乙烯裂解炉炉管材料的性能及其选用[J].石油化工设备,1989,18(6):37-40. 被引量:3
  • 3谭家隆,李军辉.乙烯裂解反应管的渗碳损伤及其原因[c]//石油化工装置失效分析论文选集.大连:大连理工大学出版社,1991.
  • 4Jakobi D, Gommans R Typical failures in pyrolysis coils for ethylene cracking[J]. Materials and Corrosion, 2003,54 (11) : 881--886.
  • 5Mucek, Mark W. Laboratory detection of degree of carburization in ethylene pyrolysis furnace tubing[J]. Materials Performance, 1983,22(9) : 25--28.
  • 6郑承炎,陈道坤,王传华.裂解炉管及其焊接接头的断裂分析[C]//第四届全国压力容器学术会议论文集.无锡:中国机械工程学会压力容器分会,1997:165-169.
  • 7Kaya, Ali Arslan. Microstructure of HK40 alloy after hightemperature service in oxidizing/carburizing environment: II. Carburization and carbide transformations [ J ]. Materials Characterization, 2002,49 ( 1 ) : 23 -- 34.
  • 8Lyle F A. Ethylene tube studies-conclusion: Metal samples from small-diameter furnace tubes examined in SEM and EDAX analyses[J]. Oil & Gas Journal, 1988,19:90-96.
  • 9Eunjung J, Sunwon P, Moonyong L. Pyrolysis Reaction Mechanism for Industrial Naphtha Cracking Furnace [J]. Industrial and Engineering Chemistry Research, 2001, 40(11) : 2409 -2415.
  • 10Dini G M,Vaghefi S M, Lotfiani M. Computational and Experimental Failure Analysis of Continuous-An- nealing Furnace Radiant Tubes Exposed to Excessive Temperature [ J ]. Engineering Failure Analysis, 2008, 15(5) : 445 ~457.

引证文献3

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部