期刊文献+

高碳树脂芳基乙炔聚合物炭化过程研究 被引量:1

Study on prorerties of heat-resistant polyarylacetylene
原文传递
导出
摘要 本文研究了芳基乙炔聚合物 (PAA)炭化过程中的结构变化 ,结果表明 :树脂 90 0℃炭化时 ,热失重、线收缩和体积收缩分别为 16 %、12 5 %和 31 8% ;炭化温度低于 6 0 0℃时 ,孔隙率随炭化温度的升高而增加 ,体积密度随炭化温度的升高而减小 ;6 0 0~ 90 0℃炭化时 ,孔隙率随炭化温度的升高而减小 ,体积密度随炭化温度的升高而增加 ;在整个炭化温度范围内 ,本体密度随炭化温度的升高而增加。PAA树脂炭化物结构密实 。 In this paper, the structure changes of polyarylacetylene (PAA resin) after carbonization were studied. The results show that the weight loss, linear shrinkage and volume shrinkage of PAA resin at 900℃ are 16%,12 5% and 31.8%, respectively; carbonization below 600℃, porosity increase but volume density decrease with the temperature increasing; carbonization at 600~900℃, porosity decrease but volume density increase with the temperature increasing. At the whole carbonization process, the bulk density increases with the temperature increasing. PAA carbonization product had dense and lamella structure.
出处 《化工新型材料》 CAS CSCD 2004年第11期32-35,共4页 New Chemical Materials
关键词 炭化温度 树脂 芳基乙炔聚合物 炭化过程 体积密度 热失重 孔隙率 PAA 片状结构 结构变化 polyarylacetylene,ablation material,heat-resistant material,carbonization
  • 相关文献

参考文献5

  • 1Katzman H A,et al. [J]. J Adv Mater, 1995, 26(3): 21
  • 2Bilow N,et al.[J]. SAMPE J,1982,18(3):19
  • 3Rautavuori J, Tormala P. [J]. J Mater Sci,1979,14(8): 2020
  • 4Jenkins G M, Jones R A. [J]. High Ttemp-High Press,1977, 9(2): 137
  • 5Bhatia G, et al. [J]. J Mater Sci,1984,19(3): 1022

同被引文献26

引证文献1

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部