A TWO-SURFACE MODEL DESCRIBING RATCHETTING BEHAVIORS AND TRANSIENT HARDENING UNDER NONPROPORTIONAL LOADING 被引量：1

A TWO-SURFACE MODEL DESCRIBING RATCHETTING BEHAVIORS AND TRANSIENT HARDENING UNDER NONPROPORTIONAL LOADING

下载PDF

导出

摘要 A new superposed rule of Mroz's kinematic hardening rule and Ziegler's kinematic hardening rule based on two-surface model is proposed in the paper. Some experimental results on ratchetting of 2014-T6 aluminum alloy are predicted very well under multiaxial loading. In addition the conformability of the model is discussed for transient cyclic hardening under two kinds of nonproportional cyclic loading paths., i.e. square and rhombic path. A new superposed rule of Mroz's kinematic hardening rule and Ziegler's kinematic hardening rule based on two-surface model is proposed in the paper. Some experimental results on ratchetting of 2014-T6 aluminum alloy are predicted very well under multiaxial loading. In addition the conformability of the model is discussed for transient cyclic hardening under two kinds of nonproportional cyclic loading paths., i.e. square and rhombic path.

作者陈旭 A.Abel

机构地区 Dept.of Chemical Engineering School of Civil and Mining Engineering

出处《Acta Mechanica Sinica》 SCIE EI CAS CSCD 1996年第4期368-376,共9页 力学学报（英文版）

基金 The project supported by the National Natural Science Foundation of China

关键词 nonproportional loading multiaxial loading RATCHETTING two-surface model cyclic hardening nonproportional loading multiaxial loading ratchetting two-surface model cyclic hardening

分类号 TH112.4 [机械工程—机械设计及理论]

引文网络
相关文献

参考文献12

1Dr. techn. sci. Z. Mróz.An attempt to describe the behavior of metals under cyclic loads using a more general workhardening model[J]. Acta Mechanica . 1969 (2-3)
2Yoshida,F.Ratchetting behaviour of 304 stainless steel at 650°C under multiaxial strain-controlled and uniaxially/multiaxially stress-controlled condition. European Journal of Mechanics A Solids . 1995
3Lamba,HS,Sidebottom,OM.Cyclic plasticity for nonproportional paths—Part II, comparison with prediction of three incremental plasticity model. ASME Trans J Engng Mater Tech . 1978
4McDowell D L.Description of nonproportional cyclic ratchetting behavior. Eur European Journal of Mechanics, A/Solids . 1994
5Chaboche J L,Nouailhas D.Constitutive Modeling of Ratcheting Effects, Part I, Experimental Facts and Properties of the Classical Models. Journal of Engineering Materials and Technology Transactions of the ASME . 1989
6Chaboche J L,Nouailhas D.Constitutive modeling of ratcheting effects, Part Ⅱ: Possibilities of some additional kinematic rules. Asme Transactions Journal Engineering Materials and Technology . 1989
7Ellyin F,Xia Z.A rate-in dependent constitutive model for transient nonproportional loading. Journal of the Mechanics and Physics of Solids . 1989
8Ziegler H.A modification of Prager’s hardening rule. Quarterly of Applied Mathematics . 1959
9Ohno, N,Wang, J.D.Nonlinear kinematic hardening rule: Proposition and application to ratcheting problems, Structural mechanics in reactor technology. Transactions of the 11th International Conference on Structural Mechanics in Reactor Technology . 1991
10Hassan T,,Corona E,Kyriakides S.Ratchetting in cyclic plasticity-Part Ⅱ:multiaxial behavior. International Journal of Plasticity . 1992

引证文献1

1安柯,陈旭.金属材料在应变路径旋转下的应力响应[J].天津大学学报（自然科学与工程技术版）,2001,34(1):18-22. 被引量：1

二级引证文献1

1郑怡,刘明,向阳开.40Cr钢和16Mn钢的室温单轴应变循环特性[J].机械工程材料,2009,33(1):8-9.

1高红,陈旭,焦荣.Constitutive Model for Multiaxial Ratcheting Predictions of Cyclic Softening Weld Metal[J].Transactions of Tianjin University,2005,11(1):11-16.
2谭博.费森尤斯4008S型血液透析机“Cyclic PHT F01”故障分析维修实例[J].医疗装备,2014,27(8):78-79. 被引量：3
3G.Z.Kang,Q.Gao,J.Zhang.VISCO-PLASTIC CONSTITUTIVE MODEL FOR UNIAXIAL AND MULTIAXIAL RATCHETING AT ELEVATED TEMPERATURES[J].Acta Metallurgica Sinica(English Letters),2004,17(4):431-436. 被引量：4
4杨成才.SIEMENS AR.C CT机维修两例[J].医用放射技术杂志,2003(5):19-20.
5Dionisio Jose Rodrigues da Costa,Ladario da Silv,Jorge Rodrigues Duran,Jose Flavio Feiteira.Experimental and Analytical Study of Torsional Vibration under Multiaxial Loading in Time Domain[J].Journal of Mechanics Engineering and Automation,2016,6(3):148-157.
6LIU HanLong 1,2 ,XIAO Yang 1,2 ,LIU JinYuan 3 &LI GuoYing 4 1 Key Laboratory of Ministry of Education for Geomechanics and Embankment Engineering,Hohai University, Nanjing 210098,China,2 Geotechnical Research Institute,Hohai University,Nanjing 210098,China,3Department of Civil Engineering,Ryerson University,Toronto,Canada,4 Department of Geotechnical Engineering,Nanjing Hydraulic Research Institute,Nanjing 210014,China.A new elliptic-parabolic yield surface model revised by an adaptive criterion for granular soils[J].Science China(Technological Sciences),2010,53(8):2152-2159. 被引量：13
7王余奎,李洪儒,许葆华.基于SIE和SVR的液压泵故障定量诊断[J].振动．测试与诊断,2017,37(1):33-41. 被引量：4
8Hossein Golbakhshi,Moslem Namjoo.Thermo-structural analysis on evaluating effects of friction and transient heat transfer on performance of gears in high-precision assemblies[J].Journal of Central South University,2017,24(1):71-80. 被引量：3
9HUANG Zhenhua.Monotonic and Cyclic Pushover Tests of Wood Beam-Column Connections:Ancient Chinese Tenon Joint vs Typical and Simplified US Connections[J].结构工程师,2011,27(B01):342-349.
10Jiming Hu,Jixun Wu,Yanping Lu,Yanrong Zhu (Material Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China).Sticking-up Behaviors and Surface Friction of IF Electrogalvanized Sheet Steel in Forming[J].International Journal of Minerals,Metallurgy and Materials,1999,13(1):61-63.

Acta Mechanica Sinica

1996年第4期

浏览历史

内容加载中请稍等...

A TWO-SURFACE MODEL DESCRIBING RATCHETTING BEHAVIORS AND TRANSIENT HARDENING UNDER NONPROPORTIONAL LOADING 被引量：1

参考文献12

引证文献1

二级引证文献1

相关作者

相关机构

相关主题

浏览历史